Center of Gravity of the MACD

Center of Gravity of the MACD

1. Introduction

The “Center of Gravity of the MACD” is an advanced indicator that combines the popular MACD (Moving Average Convergence Divergence) with the concept of Center of Gravity, providing a more accurate tool for identifying trends and potential turning points. The MACD is one of the most widely used indicators in technical analysis, as it helps to evaluate the direction and strength of a trend, as well as the divergences between price and market momentum. The Center of Gravity of the MACD takes this tool a step further by applying an advanced smoothing method and adding standard deviation bands, which helps identify key overbought and oversold areas.

2. How the Indicator Works

The indicator is built using the classic components of the MACD along with a polynomial adjustment that calculates the center of gravity and bands based on standard deviation and Fibonacci levels. Here’s a breakdown of its main elements:

  • MACD and Signal Line: These are calculated in the traditional way, using two exponential moving averages of different periods. The difference between the fast moving average (default 12 periods) and the slow moving average (26 periods) forms the MACD, while a third moving average (default 9 periods) is used to smooth the Signal Line. This difference between the MACD and its Signal Line is used as the core of the indicator to identify trends.
  • Center of Gravity (COG): The Center of Gravity is the result of applying a polynomial adjustment to the MACD values, generating a median line that acts as a balance point. This provides a smoother view of the MACD’s movement over time and helps identify more clearly the inflection points where market trends may change.
  • Standard Deviation Bands: These are added to the COG to create a channel that delimits the areas where the MACD deviates significantly from its center of gravity. These bands are calculated using the standard deviation of the differences between the MACD and the COG and are multiplied by an adjustable factor (kstd) to determine their width.
  • Fibonacci Bands: The Fibonacci bands are added as another layer of information and are based on the multiplication of the standard deviation by a Fibonacci factor (fibband). These additional bands act as potential dynamic support and resistance levels.

3. Interpreting the Indicator

The “Center of Gravity of the MACD” provides detailed information about trend direction and strength, as well as potential reversal points:

  • MACD and COG: When the MACD is above the COG, it indicates an uptrend; when it is below, it suggests a downtrend. Crosses between the MACD and the COG can serve as early signals of a possible trend change.
  • MACD Histogram: The histogram, which reflects the difference between the MACD and its Signal Line, changes color to indicate the direction and momentum of the trend:
    • Dark Green: Indicates a strengthening bullish momentum.
    • Light Green: Suggests a weakening bullish momentum.
    • Dark Red: Shows a strengthening bearish momentum.
    • Light Red: Indicates a weakening bearish momentum.
  • Standard Deviation and Fibonacci Bands: The bands act as overbought and oversold zones. When the MACD approaches or crosses the upper band, the market might be overbought, and when it nears or crosses the lower band, it could be oversold. The Fibonacci bands provide additional levels that help identify possible reversal areas.

The “Center of Gravity of the MACD” is, therefore, a comprehensive tool that offers a clear view of trends and potential turning points in the market.

4. Configuring the Indicator in ProRealTime

The “Center of Gravity of the MACD” is a flexible and customizable indicator that can adapt to different trading styles thanks to its configurable parameters. Below are the main parameters that can be adjusted in ProRealTime:

  • fma (Fast Moving Average): Number of periods for the fast moving average used to calculate the MACD. The default value is 12.
  • sma (Slow Moving Average): Number of periods for the slow moving average used to calculate the MACD. The default value is 26.
  • sigma: Number of periods for the moving average that smooths the MACD Signal Line. The default value is 9.
  • m: Controls the degree of the polynomial used to calculate the Center of Gravity. A higher value makes the adjustment more sensitive to variations in the MACD.
  • p: Defines the number of historical bars used to calculate the Center of Gravity. A higher value generates a smoother center, less sensitive to recent fluctuations.
  • kstd: Multiplication factor applied to the standard deviation to calculate the upper and lower bands. A higher value will generate wider bands, reducing overbought or oversold signals.
  • fibband: Fibonacci-based factor used to calculate the additional bands. The default value is 0.618, representing the golden ratio.

These parameters can be adjusted according to the nature of the asset you are analyzing and your investment horizon. For example, in a more volatile market, you might want to increase the “kstd” value to get more precise signals.

5. Advantages and Limitations

Advantages:

  • Combination of Multiple Tools: The Center of Gravity of the MACD combines MACD analysis with smoothing concepts and standard deviation bands, making it a very complete indicator.
  • Identification of Trends and Extreme Zones: The bands provide an effective way to identify potential overbought and oversold zones, while the COG helps identify trend direction.
  • Flexibility: The adjustable parameters allow the indicator to adapt to different financial instruments and trading styles, from intraday trading to swing trading.

Limitations:

  • Complexity: The amount of information provided can be overwhelming for beginner traders, especially if they are not familiar with using the MACD and standard deviation concepts.
  • Parameter Dependence: As with many technical indicators, the results can vary significantly depending on the parameter values. This means users need to carefully adjust these values to obtain accurate signals.
  • Signal Lag: Like other moving average-based indicators, the COG and standard deviation bands can show a certain lag relative to price action.

6. Conclusion

The “Center of Gravity of the MACD” is a powerful and versatile indicator that combines the effectiveness of the MACD with a more advanced approach to smoothing and standard deviation bands. By adding the concept of center of gravity and Fibonacci bands, it provides traders with a clearer and more detailed view of market trends and momentum, as well as potential reversal areas.

This indicator is especially useful for traders looking for a comprehensive tool that not only helps them identify the trend direction but also offers precise entry and exit points based on overbought and oversold zones. However, as with any technical indicator, it is essential to understand its limitations and adjust the parameters according to market characteristics and the instrument being analyzed.

In summary, the Center of Gravity of the MACD is an excellent addition to any trading strategy, and its flexibility and customization make it a valuable tool for both beginner and experienced traders.

Share this

Risk disclosure:

No information on this site is investment advice or a solicitation to buy or sell any financial instrument. Past performance is not indicative of future results. Trading may expose you to risk of loss greater than your deposits and is only suitable for experienced investors who have sufficient financial means to bear such risk.

ProRealTime ITF files and other attachments : How to import ITF files into ProRealTime platform?

PRC is also on YouTube, subscribe to our channel for exclusive content and tutorials

  1. MaoRai54 • 165 days ago #

    dear Ivan, it seems to be very interesting but please clarify what are all the lines I see in the chart. In your description you mention only the colors red and green but i see lines with other colors and I can’t know what they are referred. Thanks !!

    • Iván • 164 days ago #

      Hi! you have the answer in the last line of code…

      MacdMiddle as “histo” style(histogram,1)coloured(r,g,b,100)
      $fx[p] as “Center of Gravity” coloured(“blue”) style(line,2)
      $sqh[p] as “Upper Band” coloured(“red”) style(line,2)
      $sql[p] as “Lower Band” coloured(“green”) style(line,2)
      $stdh[p] as “Upper Fibonacci Band” coloured(“orange”) style(dottedline,1)
      $stdl[p] as “Lower Fibonacci Band” coloured(“orange”) style(dottedline,1)
      myMacd coloured(“yellow”) style(line,2)
      0 as “zero”

  2. kats • 154 days ago #

    Le Top , a utiliser avec le nuage violet et alerte TN pour plus de précision.

avatar
Register or

Likes

avatar avatar avatar avatar avatar
Related users ' posts
BriceE Bonjour Nicolas, Je suis a la recherche d'indicateurs pour me donner la meilleure indicatio...
Nicolas
2 years ago
Maxime Baudin Well done Nicolas, creative!
Stenozar Hi Nicolas, please can you explain how to read/use this indicator? thanks!
JC_Bywan For people interested in the screener: https://www.prorealcode.com/topic/screener-buy-sell-m...
octum Gracias NJicolas. Las lineas 35 y 36 dan fallo. (¿Es adrede para iniciados?) Puedes co...
mortezaali14 Salut Nicholas, comment exécuter ce fichier dans les métadonnées
Nicolas Yes, Magic if the variable that contains the value of the line, you can test if it goes up o...
dadah1987 Bonjour Nicolas, merci pour cet indicateur. Utilisant pour l'instant la création simplifié p...
Nicolas Merci d'ouvrir un sujet sur le forum avec une description complète du système.
GustavoLoboOrenstein Is it possible to add histogram with only increasing bars?
YvesRobert Bonjour Nicolas, en effet ca marche, je me suis trompé, j'ai bien tout le tracé. C'est parce...
oliTR Bonjour, les conditions longCond et shortCond ne contiennent-elles pas une condition qui s'a...
xpe74 Utilitaire vraiment top, d'autant qu'ajouter des filtres de seuil peux aider a limiter le no...
Madrosat repainting as cog or not repainting?
Nicolas It doesn't repaint.
Jiacky
3 years ago
Kalman Filter
Kalman Filter
0
Indicators
Nicolas
3 years ago
DELBERT Bonsoir , Nicolas , j'ai transféré votre indicateur sur ma PRT 10,3 et j'ai un méssage d'ére...
Nicolas Vous pouvez essayer en remplacant la ligne avec: vwapsd = sqrt(average[lengthz](square(clo...
DELBERT Bonsoir , merci Nicolas , a bientôt .
Stenozar Hi Sever, how can I visualize the coloured areas?
Sever Hi Stenozar, You need to add the color zones yourself , just go to Add Color Zone To set ...
atlante hi nicolas this indicator have 2 wrong borderline and islalastbarupdate. thank you can you h...
Nicolas That'"s because you are not using PRT v11? Just remove lines 59 to 62
Kanamax Hi Roberto, sorry for my confusing previous posts (forget them). My request is very simple,...
robertogozzi Please start a new topic in ProOrder support.
robertogozzi There you go: myMagicTrend = CALL “Magic Trend custom”[20, 14, 1, 5] alpha = 105 b = 0...
johann8 exactly :) Thank you all for the help!
max_92 Ciao Roberto, ho scaricato l'indicatore e come ti avevano già scritto sopra anch'io vedo la ...
Xenotrax A première vue, sa à l'air d'être un indicateur très puissant sur de petites temporalités, j...
merri Bonjour Nicolas, Comment transformer cet indicateur en bot sur PRT ?
Nicolas Cela a déjà été fait, voir ce sujet: https://www.prorealcode.com/topic/strategia-con-lindica...
Nicolas change the last line with: return v coloured(r,g,b) style(line,2), v+band coloured(168,168,1...
Paolo.B Thanks ... works as i wanted.
Kanamax Bonjour Nicolas, comme Paolo.B je souhaiterais utiliser cette indicateur au sein d'un code. ...
zilliq Thanks @Nicolas. I tried to use it as Trend in a proorder system, but don't know why, it doe...
Suzu Yuk He is right. MT and mavgMT are not defined and causing errors.....
poldoposta si potrebbe trovare una soluzione per sovrapporlo al prezzo?
robertogozzi Basta che tu clicchi sull'etichetta (tag) PREZZO del grafico (appena sotto l'angolo in alto ...

Top