Gaussian Channel Indicator: Key to Identifying Trends and Volatility

Gaussian Channel Indicator: Key to Identifying Trends and Volatility

Introduction

The Gaussian Channel is an advanced technical indicator that uses statistical principles to determine the upper and lower limits of an asset’s price movements. This indicator is especially valuable for identifying the overall market trend and potential reversal points through the analysis of standard deviations of a moving average.

Theory Behind the Gaussian Channel

The Gaussian Channel is an indicator based on the analysis of the normal distribution of prices around an adaptive moving average. This analysis is based on statistical theory that posits that asset prices, like many other variables in nature and society, tend to follow a normal or Gaussian distribution under certain conditions.

Mathematical Foundation:

The core of the Gaussian Channel indicator is based on the equation of the Gaussian curve, where the mean of the data set (prices in this context) forms the central peak of the curve, and the standard deviations determine the dispersion or “width” of the curve around this mean.

Adaptive Moving Average: 

Calculated as a weighted average of prices over a given period, which adjusts each bar to more significantly reflect the most recent data than the previous ones. This is achieved using coefficients that decay exponentially.

Calculation of Bands:

Upper and Lower Bands: Determined by adding and subtracting, respectively, a multiple of the standard deviation from the calculated adaptive moving average. The standard deviation is a statistical measure that quantifies the variation or dispersion of a set of values.

Standard Deviation Multiplier: This multiplier, often set at 2 for many statistically based channel applications, defines the width of the channel. A multiplier of 2 ensures that approximately 95% of all prices should fall within the channel under a normal distribution.

Significance in Trading:

Trading with the Trend: When the price consistently stays near the upper band, it suggests a strong bullish trend, whereas a price close to the lower band indicates a bearish trend.

Volatility Identification: A widening of the channel reflects an increase in market volatility, while a narrower channel suggests a decrease in volatility.

Thus, the Gaussian Channel not only helps visualize trend and volatility but also provides potential entry and exit points based on the statistic that prices will return to their mean with certain regularity.

Practical Applications

This indicator is useful for traders looking to confirm the current trend or identify potential overbought or oversold conditions in the market. For instance, a price that consistently moves near the upper limit of the channel could indicate a strong bullish trend, while a price approaching the lower limit may suggest a bearish trend.

Indicator Configuration

The Gaussian Channel indicator in ProRealTime allows for adjusting several parameters:

N (Number of Poles): Determines the smoothness of the moving average.

per (Sampling Period): Defines the time window for calculating the average and deviations.

mult (True Range Multiplier): Adjusts the amplitude of the bands around the moving average.

These parameters can be calibrated to suit different trading styles and assets, depending on the nature of price movements and the volatility of the instrument in question.

Implementation in ProRealTime

The code for the Gaussian Channel is developed in ProRealTime’s ProBuilder language, facilitating direct integration into the trading platform.

The complete code is designed to be copied and pasted directly into ProRealTime for immediate use.

If you prefer the code with the configurable variables already set up, you can download the .itf file attached to this post.

Conclusion

The Gaussian Channel indicator offers a robust and mathematically grounded perspective for analyzing financial markets, suitable for both novice traders and experienced technical analysts. Its ability to adapt to market volatility makes it indispensable in any technical trading toolkit.

Share this

Risk disclosure:

No information on this site is investment advice or a solicitation to buy or sell any financial instrument. Past performance is not indicative of future results. Trading may expose you to risk of loss greater than your deposits and is only suitable for experienced investors who have sufficient financial means to bear such risk.

ProRealTime ITF files and other attachments : How to import ITF files into ProRealTime platform?

PRC is also on YouTube, subscribe to our channel for exclusive content and tutorials

  1. kats • 338 days ago #

    Bonsoir, cet indicateur est vraiment très bien avec plusieurs possibilités en coloration .
    Cependant je voudrai pouvoir le mettre 2 fois sur un même graphique en renko mais avec la possibilité pour la seconde version d’avoir un multiple de 10.( le meme x10)
    J’ai beau essayé de changer les variables je n’y parviens pas.
    Est ce Possible et si oui pouvez vous me dire ce qu’il faut modifier dans le code pour y parvenir?
    D’avance merci
    cdlt

    Kats

  2. roccafragius • 338 days ago #

    Thank you Ivan for your indicators, very very interesting!!!!

  3. kats • 337 days ago #

    Bonsoir,
    Pensez vous pouvoir répondre à ma question posée ci dessus?
    Ce serait vraiment très sympa de votre part car je n’ai pas de grosses compétences en programmation alors je bidouille mais là je coince.
    En fait comme je bosse en renko je suis coincé et ne peux pas utiliser le multi frame de PRT, je dois donc faire des équivalences entre mes graphiques renko 2 et renko8 et donc pour afficher l’indic du renko 8 sur le renko 2 j’ai une delta de x10 .
    J’ai changé pas mal de choses mais rien ne fonctionne, Help!!!!
    Merci

    Kats

    • Iván • 336 days ago #

      Bonjour
      L’ensemble de l’indicateur est alimenté à partir de la ligne 9 avec la définition de la source. C’est donc là que vous devrez faire les modifications nécessaires.
      Je ne sais pas comment l’indicateur se comporte avec les bougies renko car je ne les utilise pas.

  4. kats • 334 days ago #

    BONSOIR
    c bon merci j ai trouve ce weekend
    merci de votre reponse
    cdlt

  5. the_giorgio • 147 days ago #

    Hi,

    nice work

    I would like to understand something about prorealtime code.
    With your indicator, when I open the configutation window, I have 4 check boxes
    Filtered TR High Band
    Filtered TR Low Band
    Filter
    Candelstick

    The 3 first are from your code (return values)
    But where it come from “Candelstick” ? how do you that ?

    And also you have a drop down list “Apply to” (close). How you do that ? and it seems to not work, in your code, you have hard coded the source

    Thanks

    For you work

    • Iván • 145 days ago #

      Hello.
      When you use the drawcandle() instruction then in the configuration window you add one more line to configure, the candles.
      On the other hand in line 33 there is a variable defined which is the true range. If you don’t say anything about it, PRT interprets that the TR applies by default to close, but you can change it in the configuration window.

avatar
Register or

Likes

avatar avatar avatar avatar avatar avatar avatar avatar avatar avatar avatar avatar
Related users ' posts
Nicolas
2 years ago
Lucas0000 Hello, Congratulations on this programming, it seems incredible to me, I am new to this but ...
plbourse Hello, I am trying to use this singal (in fact I have converted it to an indicateur giving B...
manfeber Buenos dias,alguien me podria decir como se descargar el archivo o el indicador Q-Trend??,ya...
BriceE Bonjour Nicolas, Je suis a la recherche d'indicateurs pour me donner la meilleure indicatio...
Nicolas
2 years ago
Maxime Baudin Well done Nicolas, creative!
Stenozar Hi Nicolas, please can you explain how to read/use this indicator? thanks!
JC_Bywan For people interested in the screener: https://www.prorealcode.com/topic/screener-buy-sell-m...
octum Gracias NJicolas. Las lineas 35 y 36 dan fallo. (¿Es adrede para iniciados?) Puedes co...
mortezaali14 Salut Nicholas, comment exécuter ce fichier dans les métadonnées
Nicolas Yes, Magic if the variable that contains the value of the line, you can test if it goes up o...
dadah1987 Bonjour Nicolas, merci pour cet indicateur. Utilisant pour l'instant la création simplifié p...
Nicolas Merci d'ouvrir un sujet sur le forum avec une description complète du système.
GustavoLoboOrenstein Is it possible to add histogram with only increasing bars?
YvesRobert Bonjour Nicolas, en effet ca marche, je me suis trompé, j'ai bien tout le tracé. C'est parce...
oliTR Bonjour, les conditions longCond et shortCond ne contiennent-elles pas une condition qui s'a...
xpe74 Utilitaire vraiment top, d'autant qu'ajouter des filtres de seuil peux aider a limiter le no...
Jiacky
3 years ago
Kalman Filter
Kalman Filter
0
Indicators
AndPar Buongiorno Nicolas, vorrei provare questo indicatore, ma quando lo inserisco in PRT mi vengo...
Nicolas Basta aggiungerlo al prezzo https://www.prorealcode.com/blog/video-tutorials/how-to-add-an-i...
Aragorna hello Nicolas, this indicator works with the last Beta version of PRT? Ive seen tha many in...
SnorreDK Works extremely well - How? How do u implement this in a startegy? Breakoutstrategy?
Keyeming Thanks, but yes same question as above, some explanations on how to read it would be appreci...
Bateson Bonjour. Merci beaucoup ! J'ai installé l'indicateur sur PRT 11 mais pour des raisons qui ...
Stenozar Hi Sever, how can I visualize the coloured areas?
Sever Hi Stenozar, You need to add the color zones yourself , just go to Add Color Zone To set ...
CederTrader Hi Denis, does this indicator add to the chart as panel, or on the candles. Thanks
Nicolas Add it on the price chart as described in this video: https://www.prorealcode.com/blog/video...
Denis Hello Nicolas and Ceder Trader, Sorry, I only just saw your replies. The indicator is alre...
atlante hi nicolas this indicator have 2 wrong borderline and islalastbarupdate. thank you can you h...
Nicolas That'"s because you are not using PRT v11? Just remove lines 59 to 62
Kanamax Hi Roberto, sorry for my confusing previous posts (forget them). My request is very simple,...
robertogozzi Please start a new topic in ProOrder support.
robertogozzi There you go: myMagicTrend = CALL “Magic Trend custom”[20, 14, 1, 5] alpha = 105 b = 0...
johann8 exactly :) Thank you all for the help!
max_92 Ciao Roberto, ho scaricato l'indicatore e come ti avevano già scritto sopra anch'io vedo la ...
Xenotrax A première vue, sa à l'air d'être un indicateur très puissant sur de petites temporalités, j...
merri Bonjour Nicolas, Comment transformer cet indicateur en bot sur PRT ?
Nicolas Cela a déjà été fait, voir ce sujet: https://www.prorealcode.com/topic/strategia-con-lindica...

Top