Halftrend MACD

Here i have made a kind of MACD indicator from the halftrend indicator from the Great NICOLAS, after the improvement from him , I want to shared with everybody.

The histogram is made from the difference of 2 HalfTrend indicator (one long and one short period), then a signal line, built with an average of 6 periods of the histogram values is added.

Trades signals are the same than a normal MACD: long position when the histogram is crossing the zero line, short order when the histogram cross the zero level. The signal line can act the same, any crosses made with the histogram could result as an new order on market:

short signal when the signal line cross above the histogram and above the zero level
long signal when the signal line cross below the histogram and below the zero level

//PRC_HalfTrend MACD | indicator
//10.03.2017
//by LUCASSEN adapted code from 
//Nicolas @ www.prorealcode.com
//Sharing ProRealTime knowledge

//Amplitude1 = 2
//Amplitude2 = 6
//Amplitude3 = 30

// -- HL #1
lowpricei1 = Lowest[Amplitude1](low)
highpricei1 = Highest[Amplitude1](high)
lowma1 = average[Amplitude1](low)
highma1 = average[Amplitude1](high)

if barindex>Amplitude1 then

if(nexttrend1=1) then

maxlowprice1=Max(lowpricei1,maxlowprice1)

if(highma1<maxlowprice1 and Close<Low[1]) then
trend1=1.0
nexttrend1=0
minhighprice1=highpricei1
endif

endif

if(nexttrend1=0) then

minhighprice1=Min(highpricei1,minhighprice1)

if(lowma1>minhighprice1 and Close>High[1]) then
trend1=0.0
nexttrend1=1
maxlowprice1=lowpricei1
endif

endif

if(trend1=0.0) then

if(trend1[1]<>0.0) then
up1=down1[1]
else
up1=Max(maxlowprice1,up1[1])
endif
down1=0.0

else

if(trend1[1]<>1.0) then
down1=up1[1]
else
down1=Min(minhighprice1,down1[1])
endif
up1=0.0
endif

endif





// -- HL #2
lowpricei2 = Lowest[Amplitude2](low)
highpricei2 = Highest[Amplitude2](high)
lowma2 = average[Amplitude2](low)
highma2= average[Amplitude2](high)

if barindex>Amplitude2 then

if(nexttrend2=1) then

maxlowprice2=Max(lowpricei2,maxlowprice2)

if(highma2<maxlowprice2 and Close<Low[1]) then
trend2=1.0
nexttrend2=0
minhighprice2=highpricei2
endif

endif

if(nexttrend2=0) then

minhighprice2=Min(highpricei2,minhighprice2)

if(lowma2>minhighprice2 and Close>High[1]) then
trend2=0.0
nexttrend2=1
maxlowprice2=lowpricei2
endif

endif

if(trend2=0.0) then

if(trend2[1]<>0.0) then
up2=down2[1]
else
up2=Max(maxlowprice2,up2[1])
endif
down2=0.0

else

if(trend2[1]<>1.0) then
down2=up2[1]
else
down2=Min(minhighprice2,down2[1])
endif
up2=0.0
endif

endif

if up2>0 then
halftrend2 = up2

else
halftrend2 = down2

endif

// -- HL #3
lowpricei3 = Lowest[Amplitude3](low)
highpricei3 = Highest[Amplitude3](high)
lowma3 = average[Amplitude3](low)
highma3= average[Amplitude3](high)

if barindex>Amplitude3 then

if(nexttrend3=1) then

maxlowprice3=Max(lowpricei3,maxlowprice3)

if(highma3<maxlowprice3 and Close<Low[1]) then
trend3=1.0
nexttrend3=0
minhighprice3=highpricei3
endif

endif

if(nexttrend3=0) then

minhighprice3=Min(highpricei3,minhighprice3)

if(lowma3>minhighprice3 and Close>High[1]) then
trend3=0.0
nexttrend3=1
maxlowprice3=lowpricei3
endif

endif

if(trend3=0.0) then

if(trend3[1]<>0.0) then
up3=down3[1]
else
up3=Max(maxlowprice3,up3[1])
endif
down3=0.0

else

if(trend3[1]<>1.0) then
down3=up3[1]
else
down3=Min(minhighprice3,down3[1])
endif
up3=0.0
endif

endif

if up3>0 then
halftrend3 = up3
else
halftrend3 = down3

endif

return (halftrend2 - halftrend3),average[6] (halftrend2 - halftrend3)

100

101

102

103

104

105

106

107

108

109

110

111

112

113

114

115

116

117

118

119

120

121

122

123

124

125

126

127

128

129

130

131

132

133

134

135

136

137

138

139

140

141

142

143

144

145

146

147

148

149

150

151

152

153

154

155

156

157

158

159

160

161

162

163

164

165

166

167

168

169

170

171

172

173

174

175

176

177

178

179

180

181

182

183

184

185

186

187

188

189

//PRC_HalfTrend MACD | indicator

//10.03.2017

//by LUCASSEN adapted code from

//Nicolas @ www.prorealcode.com

//Sharing ProRealTime knowledge

//Amplitude1 = 2

//Amplitude2 = 6

//Amplitude3 = 30

// -- HL #1

lowpricei1 = Lowest[Amplitude1](low)

highpricei1 = Highest[Amplitude1](high)

lowma1 = average[Amplitude1](low)

highma1 = average[Amplitude1](high)

if barindex>Amplitude1 then

if(nexttrend1=1) then

maxlowprice1=Max(lowpricei1,maxlowprice1)

if(highma1<maxlowprice1 and Close<Low[1]) then

trend1=1.0

nexttrend1=0

minhighprice1=highpricei1

endif

if(nexttrend1=0) then

minhighprice1=Min(highpricei1,minhighprice1)

if(lowma1>minhighprice1 and Close>High[1]) then

trend1=0.0

nexttrend1=1

maxlowprice1=lowpricei1

endif

if(trend1=0.0) then

if(trend1[1]<>0.0) then

up1=down1[1]

else

up1=Max(maxlowprice1,up1[1])

endif

down1=0.0

else

if(trend1[1]<>1.0) then

down1=up1[1]

else

down1=Min(minhighprice1,down1[1])

endif

up1=0.0

endif

// -- HL #2

lowpricei2 = Lowest[Amplitude2](low)

highpricei2 = Highest[Amplitude2](high)

lowma2 = average[Amplitude2](low)

highma2= average[Amplitude2](high)

if barindex>Amplitude2 then

if(nexttrend2=1) then

maxlowprice2=Max(lowpricei2,maxlowprice2)

if(highma2<maxlowprice2 and Close<Low[1]) then

trend2=1.0

nexttrend2=0

minhighprice2=highpricei2

endif

if(nexttrend2=0) then

minhighprice2=Min(highpricei2,minhighprice2)

if(lowma2>minhighprice2 and Close>High[1]) then

trend2=0.0

nexttrend2=1

maxlowprice2=lowpricei2

endif

if(trend2=0.0) then

if(trend2[1]<>0.0) then

up2=down2[1]

else

up2=Max(maxlowprice2,up2[1])

endif

down2=0.0

else

if(trend2[1]<>1.0) then

down2=up2[1]

else

down2=Min(minhighprice2,down2[1])

endif

up2=0.0

endif

if up2>0 then

halftrend2 = up2

else

halftrend2 = down2

endif

// -- HL #3

lowpricei3 = Lowest[Amplitude3](low)

highpricei3 = Highest[Amplitude3](high)

lowma3 = average[Amplitude3](low)

highma3= average[Amplitude3](high)

if barindex>Amplitude3 then

if(nexttrend3=1) then

maxlowprice3=Max(lowpricei3,maxlowprice3)

if(highma3<maxlowprice3 and Close<Low[1]) then

trend3=1.0

nexttrend3=0

minhighprice3=highpricei3

endif

if(nexttrend3=0) then

minhighprice3=Min(highpricei3,minhighprice3)

if(lowma3>minhighprice3 and Close>High[1]) then

trend3=0.0

nexttrend3=1

maxlowprice3=lowpricei3

endif

if(trend3=0.0) then

if(trend3[1]<>0.0) then

up3=down3[1]

else

up3=Max(maxlowprice3,up3[1])

endif

down3=0.0

else

if(trend3[1]<>1.0) then

down3=up3[1]

else

down3=Min(minhighprice3,down3[1])

endif

up3=0.0

endif

if up3>0 then

halftrend3 = up3

else

halftrend3 = down3

endif

return (halftrend2 - halftrend3),average[6] (halftrend2 - halftrend3)

MACD trend trend following

Risk disclosure:

No information on this site is investment advice or a solicitation to buy or sell any financial instrument. Past performance is not indicative of future results. Trading may expose you to risk of loss greater than your deposits and is only suitable for experienced investors who have sufficient financial means to bear such risk.

ProRealTime ITF files and other attachments :

Filename : download the ITF files

How to import ITF files into ProRealTime platform?

Find other exclusive trading pro-tools on

PRC is also on YouTube, subscribe to our channel for exclusive content and tutorials


supertiti • 04/06/2017 #
amplitude 1.2.3 = ( 2-6-30 ) or (1-1-27) ?

LUCASSEN • 04/06/2017 #
Hallo Supertiti
Macd amplitude=1-1-27 and prc halftrend triple in Heikin Ashi grafiek amplitude =2-6-10
greetings Lucassen

supertiti • 04/06/2017 #
Thanks you so much Lucassen

dreif123 • 04/06/2017 #
hi, copied the above code, not working on 10.3
the system says “return can only be used at proBuilder….what do i have todo ?

LUCASSEN • 04/06/2017 #
Hallo , i have no problem , and i have the same versie 10.3, maybe you can ask Nicolas, that men nows a lot over indicators.
greetings Lucassen

imokdesign Hi Everybody, when I look at the strategy I felt the need to implement a Moneymanagement-Sy...

Inertia newlevel then multiplier=multiplier+1 oldlevel=newlevel newlevel=strategyprofit+startequi...

Inertia Hi Bjoern, I was playing around with your code this morning (EUR/USD 5'). Thank you to the...

CavalierDeCesDames Bonjour Nicolas, Thanks for your use full job. I tried this indicator on a shorter timefram...

Nicolas You are welcome. I'm glad you like it.

Bolbo It does not appear over the price indicator on V11. Thanks in advance.

bearbull As per PhilipSchultz question above, has anybody managed to add code for when it turns blue,...

Ybr35 Bonjour Nicolas, lorsque je lance l'indicateur, il m'est indiqué que je dois définir les var...

Nicolas L'idéal est de télécharger le fichier itf joint sur cette page et de l'importer dans la plat...

Nicolas Merci dans ce cas d'ouvrir un sujet dans le forum ProScreener svp.

Andrea Hi Nicolas, thx for your code. Please i need your help to understand this part of your code:...

Nicolas the MA200 is ascending since 20 periods.

Loop Hi All! Would it be possible to have the same indicator with the MACD calculated with the DE...

Nicolas Why not, but do you think it would make such a noticeable difference?

Loop Good question Nicolas! That's why I was curious to check it! MACD based on DEMA is usually m...

Regan2020 Hi, has anybody update the above code to enable on a 15m or 5m TF?

gigi64 ik heb de code op mijn pro realtime gezet , en bij indicator staat hij erbij maar komt niet ...

gigi64 I have put the code on my pro realtime, and it is on the indicator, but it does not appear o...

Nicolas Para cambiar los colores del histograma, deben usarse las variables r, gyb entre las líneas ...

leofib Hello, I was looking for a MACD Histogram with red and green bars according to the value of ...

Helgart Hi, it's great to have this option of having a histogram coloured based on rising or fall...

Krallenmann Hallo Nicolas, kannst du mir die Regeln für den Halftrend Indikator sagen? Aus dem Code kann...

davefransman Dear Nicolas, i want set a alert on the "HalfTrend "custom moving average" met Heikin Ashi w...

Nicolas Please post the question in a new forum topic, that would need custom coding I believe.

Lyam Pareil ne marche pas dommage

ahmedbouaziz89 Bonjour, quand j'ajoute le code ou le fichier dans l'outils screeners de Prorealtime je ne v...

tyvix Bonjour le code marche bien c est juste qu'il n y a pas d opportunité au moment ou vous le...

verdi55 Is there such a thing as a free lunch ?

maceng Thanks Nicolas for this great work! I would like to understand the math behind it in order t...

Nicolas Sorry I have no time to provide assistance for python programmers. Have a good day.

Maz Hi all, firstly happy to know that this is helping you. I look into updating it for PRT11 wh...

Nicolas just use 3 times a linear regression channel code you will find in the library.

leederbyshire Here's the link to alternative linear regression channel indicator Nicolas is referring to t...

Wing Yes, investigate as much as you want. For more insight, you can view the linet1, linet2 etc....

CKW Hi Wing, Thanks for your sharing. I am still trying to breakdown & understand your code...

Wing Hello CKW. No, the parameter, 7 in this case, is used when calling the RSI indicator to ide...

Nicolas Je vais faire l'indicateur et expliquer comment en même temps dans un sujet de forum. Plus s...

gregus merci nicolas toute ma gratitude est pour toi sa sera bien pratique car je pense ne pas etre...

Nicolas Ok merci donc d'ouvrir un sujet spécifique pour cette demande donc :)

algotrader This indicator looks coolBut on attempt to use it for a strategy dev'I get an error.."The in...

dajvop @algotrader if you at the bottom of the code add: RETURN Buffer1 as "up", Buffer2 as "down",...

Bateson Si cela peut servir, l'indicateur Sadukey a été créé en utilisant un générateur de filtre ap...

Nicolas Thanks for contributing to the "ichimoku section" of the prorealtime code library Don't he...

sourberry Thank you , this is a great indicator works beautifully. Could you kindly modify to scr...

pp_playaflamenca Excuse me,... reading your code about spanB: [ SenkouSpanBFutureW = (Highest[SenkouSpanPerio...

Arnaud HALVICK Great indicator, thank you!

JMat45 Hi Nicolas, just reviewing this indicator and noticed that you have double assigned the vari...

Nicolas That would not make any difference because the code is read from top to bottom.

Share this

Likes