iBox - Open Range for London and US Session - Indicators

This indicator represents the open range for 2 time zones and different time units. My special thanks go to Kasper Elsborg @ Elsborgrading, whose basic idea I have extended here.

The goal is to detect potential breakouts early, I have made use of an observation that each of the targeted targets make up 100% of the pre-market range. Thus, goal 1 gives 100%, goal 2 200% ect. ,

I try to display 2 ranges from 8:00 to 9:00 and from 9:00 to 10:00, or 14:30 to 15:30 and 15:30 to 16:30.

The variable “Underlying” 1 stands for London Session and 2 for US Session

The variable “time unit” is selectable for the preferred time unit in the chart, possible selection 1 (1 min), 3 (3 min), 5 (5 min), 10 (10 min), 15 (15 min), 30 (30 min ), 60 (60 min). Attempting to enter other numbers will inevitably lead to the indicator falling!

The thin black line indicates the opening and can be hidden.

Good Trades!

//===========================================================
//VORBÖRSE UND iBOX FÜR DAX UND DOW VARIABLE ZEITEINHEIT UND ZIELZONEN. BASIEREND AUF EINER IDEE VON Kasper Elsborg @Elsborgtrading. MODIFIZIERT UND ERWWEITERT VON A. CAPELLE (ATXeeL)
//===========================================================
//Variable Zeiteinheit 1, 3, 5, 10, 15, 30, 60
//Variable Underlying 1, für London-Session und 2 für US-Session
defparam drawonlastbaronly = false
IF UNDERLYING =1 THEN //DAX
TTIME = 080000
ENDIF
IF UNDERLYING =2 THEN //DOW
TTIME = 143000
ENDIF
RV=200
GV=000
BV=250

RH=0
GH=050
BH=255
EROEFFNUNG= DOPEN(0)
IF ZEITEINHEIT =1 THEN
ZE= 60
PF=25
PH=6
starttime = TTIME+010100
endtime = TTIME+020000
starttimeV = TTIME+00100
endtimeV = TTIME+010000
ENDIF
IF ZEITEINHEIT =3 THEN
ZE= 21
PF=7
PH=5
starttime =TTIME+ 010300
endtime =TTIME +020300
starttimeV =TTIME+ 000300
endtimeV =TTIME+ 010300
ENDIF
IF ZEITEINHEIT =5 THEN
ZE= 13
PF=5
PH=4
starttime =TTIME+ 010500
endtime =TTIME+ 020500
starttimeV = TTIME+000500
endtimeV =TTIME+ 010500
ENDIF
IF ZEITEINHEIT =10 THEN
ZE= 7
PF=7
PH=3
starttime =TTIME+ 011000
endtime =TTIME+ 021000
starttimeV =TTIME+ 001000
endtimeV =TTIME+ 011000
ENDIF
IF ZEITEINHEIT =15 THEN
ZE= 5
PF=5
PH=3
starttime =TTIME+ 011500
endtime = TTIME+021500
starttimeV =TTIME+ 001500
endtimeV =TTIME+ 011500
ENDIF
IF ZEITEINHEIT =30 THEN
ZE= 3
PF=2
PH=2
starttime =TTIME+ 013000
endtime = TTIME+023000
starttimeV =TTIME+ 003000
endtimeV =TTIME+ 013000
ENDIF
IF ZEITEINHEIT =60 THEN
ZE= 1
PF=1
PH=2
starttime =TTIME+ 020000
endtime =TTIME+ 030000
starttimeV =TTIME+ 010000
endtimeV =TTIME+ 020000
ENDIF


If Time = endtime then
upper=highest[ZE](high)
lower=lowest[ZE](low)
DIF = upper-lower
zielzonelongI = upper +dif
zielzoneSHORTI =LOWER -DIF
zielzonelongI2 = upper +dif*2
zielzoneSHORTI2 =LOWER -DIF*2
zielzonelongI3 = upper +dif*3
zielzoneSHORTI3 =LOWER -DIF*3
zielzonelongI4 = upper +dif*4
zielzoneSHORTI4 =LOWER -DIF*4
zielzonelongI5 = upper +dif*5
zielzoneSHORTI5 =LOWER -DIF*5
zielzonelongI6 = upper +dif*6
zielzoneSHORTI6 =LOWER -DIF*6
//bars=barindex
DRAWTEXT("#dif# PKT", barindex-PH, upper+10,SansSerif,bold, 12)COLOURED(RH,GH,BH)
DRAWTEXT("#upper#", barindex-PH-5, upper+3,SansSerif,bold, 12)COLOURED(RH,GH,BH)
DRAWTEXT("#lower#", barindex-PH-5, lower-3,SansSerif,bold, 12)COLOURED(RH,GH,BH)
DRAWTEXT("#zielzonelongI# ZIEL1", barindex-PF-12, zielzonelongI,SansSerif,bold, 12)COLOURED(RH,GH,BH)
DRAWTEXT("#zielzoneSHORTI# ZIEL1", barindex-PF-12, zielzoneSHORTI,SansSerif,bold, 12)COLOURED(RH,GH,BH)
DRAWTEXT("#zielzonelongI2# ZIEL2", barindex-PF-12, zielzonelongI2,SansSerif,bold, 12)COLOURED(RH,GH,BH)
DRAWTEXT("#zielzoneSHORTI2# ZIEL2", barindex-PF-12, zielzoneSHORTI2,SansSerif,bold, 12)COLOURED(RH,GH,BH)
DRAWTEXT("#zielzonelongI3# ZIEL3", barindex-PF-12, zielzonelongI3,SansSerif,bold, 12)COLOURED(RH,GH,BH)
DRAWTEXT("#zielzoneSHORTI3# ZIEL3", barindex-PF-12, zielzoneSHORTI3,SansSerif,bold, 12)COLOURED(RH,GH,BH)
DRAWTEXT("#zielzonelongI4# ZIEL4", barindex-PF-12, zielzonelongI4,SansSerif,bold, 12)COLOURED(RH,GH,BH)
DRAWTEXT("#zielzoneSHORTI4# ZIEL4", barindex-PF-12, zielzoneSHORTI4,SansSerif,bold, 12)COLOURED(RH,GH,BH)
DRAWTEXT("#zielzonelongI5# ZIEL5", barindex-PF-12, zielzonelongI5,SansSerif,bold, 12)COLOURED(RH,GH,BH)
DRAWTEXT("#zielzoneSHORTI5# ZIEL5", barindex-PF-12, zielzoneSHORTI5,SansSerif,bold, 12)COLOURED(RH,GH,BH)
DRAWTEXT("#zielzonelongI6# ZIEL6", barindex-PF-12, zielzonelongI6,SansSerif,bold, 12)COLOURED(RH,GH,BH)
DRAWTEXT("#zielzoneSHORTI6# ZIEL6", barindex-PF-12, zielzoneSHORTI6,SansSerif,bold, 12)COLOURED(RH,GH,BH)
endif
If Time = endtimeV then
upperV=highest[ZE](high)
lowerV=lowest[ZE](low)
DIFV=upperV-lowerV
zielzonelong = upperV +difv
zielzoneSHORT =LOWERV -DIFV
zielzonelong2 = upperV +difv*2
zielzoneSHORT2 =LOWERV -DIFV*2
zielzonelong3 = upperV +difv*3
zielzoneSHORT3 =LOWERV -DIFV*3
zielzonelong4 = upperV +difv*4
zielzoneSHORT4 =LOWERV -DIFV*4
zielzonelong5 = upperV +difv*5
zielzoneSHORT5 =LOWERV -DIFV*5
zielzonelong6 = upperV +difv*6
zielzoneSHORT6 =LOWERV -DIFV*6
zielzonelong7 = upperV +difv*7
zielzoneSHORT7 =LOWERV -DIFV*7
zielzonelong8 = upperV +difv*8
zielzoneSHORT8 =LOWERV -DIFV*8
//bars=barindex
DRAWTEXT("#difV# PKT", barindex-PH, upperV+10,SansSerif,bold, 12)COLOURED(RV,GV,BV)
DRAWTEXT("#upperV#", barindex-PH, upperV+3,SansSerif,bold, 12)COLOURED(RV,GV,BV)
DRAWTEXT("#lowerV#", barindex-PH, lowerV-3,SansSerif,bold, 12)COLOURED(RV,GV,BV)
DRAWTEXT("#zielzonelong# ZIEL1", barindex-PF, zielzonelong,SansSerif,bold, 12)COLOURED(RV,GV,BV)
DRAWTEXT("#zielzoneSHORT# ZIEL1", barindex-PF, zielzoneSHORT,SansSerif,bold, 12)COLOURED(RV,GV,BV)
DRAWTEXT("#zielzonelong2# ZIEL2", barindex-PF, zielzonelong2,SansSerif,bold, 12)COLOURED(RV,GV,BV)
DRAWTEXT("#zielzoneSHORT2# ZIEL2", barindex-PF, zielzoneSHORT2,SansSerif,bold, 12)COLOURED(RV,GV,BV)
DRAWTEXT("#zielzonelong3# ZIEL3", barindex-PF, zielzonelong3,SansSerif,bold, 12)COLOURED(RV,GV,BV)
DRAWTEXT("#zielzoneSHORT3# ZIEL3", barindex-PF, zielzoneSHORT3,SansSerif,bold, 12)COLOURED(RV,GV,BV)
DRAWTEXT("#zielzonelong4# ZIEL4", barindex-PF, zielzonelong4,SansSerif,bold, 12)COLOURED(RV,GV,BV)
DRAWTEXT("#zielzoneSHORT4# ZIEL4", barindex-PF, zielzoneSHORT4,SansSerif,bold, 12)COLOURED(RV,GV,BV)
DRAWTEXT("#zielzonelong5# ZIEL5", barindex-PF, zielzonelong5,SansSerif,bold, 12)COLOURED(RV,GV,BV)
DRAWTEXT("#zielzoneSHORT5# ZIEL5", barindex-PF, zielzoneSHORT5,SansSerif,bold, 12)COLOURED(RV,GV,BV)
DRAWTEXT("#zielzonelong6# ZIEL6", barindex-PF, zielzonelong6,SansSerif,bold, 12)COLOURED(RV,GV,BV)
DRAWTEXT("#zielzoneSHORT6# ZIEL6", barindex-PF, zielzoneSHORT6,SansSerif,bold, 12)COLOURED(RV,GV,BV)
DRAWTEXT("#zielzonelong7# ZIEL7", barindex-PF, zielzonelong7,SansSerif,bold, 12)COLOURED(RV,GV,BV)
DRAWTEXT("#zielzoneSHORT7# ZIEL7", barindex-PF, zielzoneSHORT7,SansSerif,bold, 12)COLOURED(RV,GV,BV)
DRAWTEXT("#zielzonelong8# ZIEL8", barindex-PF, zielzonelong8,SansSerif,bold, 12)COLOURED(RV,GV,BV)
DRAWTEXT("#zielzoneSHORT8# ZIEL8", barindex-PF, zielzoneSHORT8,SansSerif,bold, 12)COLOURED(RV,GV,BV)
endif

if time >=ENDTIME and Time <=220000 then
count=count+1
DRAWsegment(barindex-count,upper,barindex,upper) coloured(RH,GH,BH)
DRAWsegment(barindex-count,lower,barindex,lower)coloured(RH,GH,BH)
DRAWsegment(barindex-count,zielzonelongI,barindex,zielzonelongI)coloured(RH,GH,BH)
DRAWsegment(barindex-count,zielzoneSHORTI,barindex,zielzoneSHORTI)coloured(RH,GH,BH)
DRAWsegment(barindex-count,zielzonelongI2,barindex,zielzonelongI2)coloured(RH,GH,BH)
DRAWsegment(barindex-count,zielzoneSHORTI2,barindex,zielzoneSHORTI2)coloured(RH,GH,BH)
DRAWsegment(barindex-count,zielzonelongI3,barindex,zielzonelongI3)coloured(RH,GH,BH)
DRAWsegment(barindex-count,zielzoneSHORTI3,barindex,zielzoneSHORTI3)coloured(RH,GH,BH)
DRAWsegment(barindex-count,zielzonelongI4,barindex,zielzonelongI4)coloured(RH,GH,BH)
DRAWsegment(barindex-count,zielzoneSHORTI4,barindex,zielzoneSHORTI4)coloured(RH,GH,BH)
DRAWsegment(barindex-count,zielzonelongI5,barindex,zielzonelongI5)coloured(RH,GH,BH)
DRAWsegment(barindex-count,zielzoneSHORTI5,barindex,zielzoneSHORTI5)coloured(RH,GH,BH)
DRAWsegment(barindex-count,zielzonelongI6,barindex,zielzonelongI6)coloured(RH,GH,BH)
DRAWsegment(barindex-count,zielzoneSHORTI6,barindex,zielzoneSHORTI6)coloured(RH,GH,BH)
else
count=0
endif

if intradaybarindex=0 then
hh = 0
ll = 0
alreadydrawn = 0
endif

if time=starttime then
startbar=barindex
endif

if time=endtime then
endbar=barindex
endif

if time>=starttime and time<=endtime then
if high>hh then
hh = high
endif
if low<ll or ll=0 then
ll = low
endif
endif

if time>endtime and alreadydrawn=0 then
drawrectangle(startbar,hh,endbar,ll) COLOURED(RH,GH,BH,90)
alreadydrawn=1
endif
if time >=ENDTIME and Time <=220000 then
countV=countV+1
DRAWsegment(barindex-countV,upperV,barindex,upperV)COLOURED(RV,GV,BV)
DRAWsegment(barindex-countV,lowerV,barindex,lowerV)COLOURED(RV,GV,BV)
DRAWsegment(barindex-countV,zielzonelong,barindex,zielzonelong)COLOURED(RV,GV,BV)
DRAWsegment(barindex-countV,zielzoneSHORT,barindex,zielzoneSHORT)COLOURED(RV,GV,BV)
DRAWsegment(barindex-countV,zielzonelong2,barindex,zielzonelong2)COLOURED(RV,GV,BV)
DRAWsegment(barindex-countV,zielzoneSHORT2,barindex,zielzoneSHORT2)COLOURED(RV,GV,BV)
DRAWsegment(barindex-countV,zielzonelong3,barindex,zielzonelong3)COLOURED(RV,GV,BV)
DRAWsegment(barindex-countV,zielzoneSHORT3,barindex,zielzoneSHORT3)COLOURED(RV,GV,BV)
DRAWsegment(barindex-countV,zielzonelong4,barindex,zielzonelong4)COLOURED(RV,GV,BV)
DRAWsegment(barindex-countV,zielzoneSHORT4,barindex,zielzoneSHORT4)COLOURED(RV,GV,BV)
DRAWsegment(barindex-countV,zielzonelong5,barindex,zielzonelong5)COLOURED(RV,GV,BV)
DRAWsegment(barindex-countV,zielzoneSHORT5,barindex,zielzoneSHORT5)COLOURED(RV,GV,BV)
DRAWsegment(barindex-countV,zielzonelong6,barindex,zielzonelong6)COLOURED(RV,GV,BV)
DRAWsegment(barindex-countV,zielzoneSHORT6,barindex,zielzoneSHORT6)COLOURED(RV,GV,BV)
DRAWsegment(barindex-countV,zielzonelong7,barindex,zielzonelong7)COLOURED(RV,GV,BV)
DRAWsegment(barindex-countV,zielzoneSHORT7,barindex,zielzoneSHORT7)COLOURED(RV,GV,BV)
DRAWsegment(barindex-countV,zielzonelong8,barindex,zielzonelong8)COLOURED(RV,GV,BV)
DRAWsegment(barindex-countV,zielzoneSHORT8,barindex,zielzoneSHORT8)COLOURED(RV,GV,BV)
else
countV=0
endif

if intradaybarindex=0 then
hhV = 0
llV = 0
alreadydrawnV = 0
endif

if time=starttimeV then
startbarV=barindex
endif

if time=endtimeV then
endbarV=barindex
endif

if time>=starttimeV and time<=endtimeV then
if high>hhV then
hhV = high
endif
if low<llV or llV=0 then
llV = low
endif
endif

if time>endtimeV and alreadydrawnV=0 then
drawrectangle(startbarV,hhV,endbarV,llV) COLOURED(RV,GV,BV,90)
alreadydrawnV=1
endif

RETURN upperV As"upperVV" , lowerV as" lowerVV" ,upper as"upper", lower as"lower",EROEFFNUNG AS" ERÖFFNUNG"

100

101

102

103

104

105

106

107

108

109

110

111

112

113

114

115

116

117

118

119

120

121

122

123

124

125

126

127

128

129

130

131

132

133

134

135

136

137

138

139

140

141

142

143

144

145

146

147

148

149

150

151

152

153

154

155

156

157

158

159

160

161

162

163

164

165

166

167

168

169

170

171

172

173

174

175

176

177

178

179

180

181

182

183

184

185

186

187

188

189

190

191

192

193

194

195

196

197

198

199

200

201

202

203

204

205

206

207

208

209

210

211

212

213

214

215

216

217

218

219

220

221

222

223

224

225

226

227

228

229

230

231

232

233

234

235

236

237

238

239

240

241

242

243

244

245

246

247

248

249

250

251

252

253

254

255

256

257

258

259

260

//===========================================================

//VORBÖRSE UND iBOX FÜR DAX UND DOW VARIABLE ZEITEINHEIT UND ZIELZONEN. BASIEREND AUF EINER IDEE VON Kasper Elsborg @Elsborgtrading. MODIFIZIERT UND ERWWEITERT VON A. CAPELLE (ATXeeL)

//===========================================================

//Variable Zeiteinheit 1, 3, 5, 10, 15, 30, 60

//Variable Underlying 1, für London-Session und 2 für US-Session

defparam drawonlastbaronly = false

IF UNDERLYING =1 THEN //DAX

TTIME = 080000

ENDIF

IF UNDERLYING =2 THEN //DOW

TTIME = 143000

ENDIF

RV=200

GV=000

BV=250

RH=0

GH=050

BH=255

EROEFFNUNG= DOPEN(0)

IF ZEITEINHEIT =1 THEN

ZE= 60

PF=25

PH=6

starttime = TTIME+010100

endtime = TTIME+020000

starttimeV = TTIME+00100

endtimeV = TTIME+010000

ENDIF

IF ZEITEINHEIT =3 THEN

ZE= 21

PF=7

PH=5

starttime =TTIME+ 010300

endtime =TTIME +020300

starttimeV =TTIME+ 000300

endtimeV =TTIME+ 010300

ENDIF

IF ZEITEINHEIT =5 THEN

ZE= 13

PF=5

PH=4

starttime =TTIME+ 010500

endtime =TTIME+ 020500

starttimeV = TTIME+000500

endtimeV =TTIME+ 010500

ENDIF

IF ZEITEINHEIT =10 THEN

ZE= 7

PF=7

PH=3

starttime =TTIME+ 011000

endtime =TTIME+ 021000

starttimeV =TTIME+ 001000

endtimeV =TTIME+ 011000

ENDIF

IF ZEITEINHEIT =15 THEN

ZE= 5

PF=5

PH=3

starttime =TTIME+ 011500

endtime = TTIME+021500

starttimeV =TTIME+ 001500

endtimeV =TTIME+ 011500

ENDIF

IF ZEITEINHEIT =30 THEN

ZE= 3

PF=2

PH=2

starttime =TTIME+ 013000

endtime = TTIME+023000

starttimeV =TTIME+ 003000

endtimeV =TTIME+ 013000

ENDIF

IF ZEITEINHEIT =60 THEN

ZE= 1

PF=1

PH=2

starttime =TTIME+ 020000

endtime =TTIME+ 030000

starttimeV =TTIME+ 010000

endtimeV =TTIME+ 020000

ENDIF

If Time = endtime then

upper=highest[ZE](high)

lower=lowest[ZE](low)

DIF = upper-lower

zielzonelongI = upper +dif

zielzoneSHORTI =LOWER -DIF

zielzonelongI2 = upper +dif*2

zielzoneSHORTI2 =LOWER -DIF*2

zielzonelongI3 = upper +dif*3

zielzoneSHORTI3 =LOWER -DIF*3

zielzonelongI4 = upper +dif*4

zielzoneSHORTI4 =LOWER -DIF*4

zielzonelongI5 = upper +dif*5

zielzoneSHORTI5 =LOWER -DIF*5

zielzonelongI6 = upper +dif*6

zielzoneSHORTI6 =LOWER -DIF*6

//bars=barindex

DRAWTEXT("#dif# PKT", barindex-PH, upper+10,SansSerif,bold, 12)COLOURED(RH,GH,BH)

DRAWTEXT("#upper#", barindex-PH-5, upper+3,SansSerif,bold, 12)COLOURED(RH,GH,BH)

DRAWTEXT("#lower#", barindex-PH-5, lower-3,SansSerif,bold, 12)COLOURED(RH,GH,BH)

DRAWTEXT("#zielzonelongI# ZIEL1", barindex-PF-12, zielzonelongI,SansSerif,bold, 12)COLOURED(RH,GH,BH)

DRAWTEXT("#zielzoneSHORTI# ZIEL1", barindex-PF-12, zielzoneSHORTI,SansSerif,bold, 12)COLOURED(RH,GH,BH)

DRAWTEXT("#zielzonelongI2# ZIEL2", barindex-PF-12, zielzonelongI2,SansSerif,bold, 12)COLOURED(RH,GH,BH)

DRAWTEXT("#zielzoneSHORTI2# ZIEL2", barindex-PF-12, zielzoneSHORTI2,SansSerif,bold, 12)COLOURED(RH,GH,BH)

DRAWTEXT("#zielzonelongI3# ZIEL3", barindex-PF-12, zielzonelongI3,SansSerif,bold, 12)COLOURED(RH,GH,BH)

DRAWTEXT("#zielzoneSHORTI3# ZIEL3", barindex-PF-12, zielzoneSHORTI3,SansSerif,bold, 12)COLOURED(RH,GH,BH)

DRAWTEXT("#zielzonelongI4# ZIEL4", barindex-PF-12, zielzonelongI4,SansSerif,bold, 12)COLOURED(RH,GH,BH)

DRAWTEXT("#zielzoneSHORTI4# ZIEL4", barindex-PF-12, zielzoneSHORTI4,SansSerif,bold, 12)COLOURED(RH,GH,BH)

DRAWTEXT("#zielzonelongI5# ZIEL5", barindex-PF-12, zielzonelongI5,SansSerif,bold, 12)COLOURED(RH,GH,BH)

DRAWTEXT("#zielzoneSHORTI5# ZIEL5", barindex-PF-12, zielzoneSHORTI5,SansSerif,bold, 12)COLOURED(RH,GH,BH)

DRAWTEXT("#zielzonelongI6# ZIEL6", barindex-PF-12, zielzonelongI6,SansSerif,bold, 12)COLOURED(RH,GH,BH)

DRAWTEXT("#zielzoneSHORTI6# ZIEL6", barindex-PF-12, zielzoneSHORTI6,SansSerif,bold, 12)COLOURED(RH,GH,BH)

endif

If Time = endtimeV then

upperV=highest[ZE](high)

lowerV=lowest[ZE](low)

DIFV=upperV-lowerV

zielzonelong = upperV +difv

zielzoneSHORT =LOWERV -DIFV

zielzonelong2 = upperV +difv*2

zielzoneSHORT2 =LOWERV -DIFV*2

zielzonelong3 = upperV +difv*3

zielzoneSHORT3 =LOWERV -DIFV*3

zielzonelong4 = upperV +difv*4

zielzoneSHORT4 =LOWERV -DIFV*4

zielzonelong5 = upperV +difv*5

zielzoneSHORT5 =LOWERV -DIFV*5

zielzonelong6 = upperV +difv*6

zielzoneSHORT6 =LOWERV -DIFV*6

zielzonelong7 = upperV +difv*7

zielzoneSHORT7 =LOWERV -DIFV*7

zielzonelong8 = upperV +difv*8

zielzoneSHORT8 =LOWERV -DIFV*8

//bars=barindex

DRAWTEXT("#difV# PKT", barindex-PH, upperV+10,SansSerif,bold, 12)COLOURED(RV,GV,BV)

DRAWTEXT("#upperV#", barindex-PH, upperV+3,SansSerif,bold, 12)COLOURED(RV,GV,BV)

DRAWTEXT("#lowerV#", barindex-PH, lowerV-3,SansSerif,bold, 12)COLOURED(RV,GV,BV)

DRAWTEXT("#zielzonelong# ZIEL1", barindex-PF, zielzonelong,SansSerif,bold, 12)COLOURED(RV,GV,BV)

DRAWTEXT("#zielzoneSHORT# ZIEL1", barindex-PF, zielzoneSHORT,SansSerif,bold, 12)COLOURED(RV,GV,BV)

DRAWTEXT("#zielzonelong2# ZIEL2", barindex-PF, zielzonelong2,SansSerif,bold, 12)COLOURED(RV,GV,BV)

DRAWTEXT("#zielzoneSHORT2# ZIEL2", barindex-PF, zielzoneSHORT2,SansSerif,bold, 12)COLOURED(RV,GV,BV)

DRAWTEXT("#zielzonelong3# ZIEL3", barindex-PF, zielzonelong3,SansSerif,bold, 12)COLOURED(RV,GV,BV)

DRAWTEXT("#zielzoneSHORT3# ZIEL3", barindex-PF, zielzoneSHORT3,SansSerif,bold, 12)COLOURED(RV,GV,BV)

DRAWTEXT("#zielzonelong4# ZIEL4", barindex-PF, zielzonelong4,SansSerif,bold, 12)COLOURED(RV,GV,BV)

DRAWTEXT("#zielzoneSHORT4# ZIEL4", barindex-PF, zielzoneSHORT4,SansSerif,bold, 12)COLOURED(RV,GV,BV)

DRAWTEXT("#zielzonelong5# ZIEL5", barindex-PF, zielzonelong5,SansSerif,bold, 12)COLOURED(RV,GV,BV)

DRAWTEXT("#zielzoneSHORT5# ZIEL5", barindex-PF, zielzoneSHORT5,SansSerif,bold, 12)COLOURED(RV,GV,BV)

DRAWTEXT("#zielzonelong6# ZIEL6", barindex-PF, zielzonelong6,SansSerif,bold, 12)COLOURED(RV,GV,BV)

DRAWTEXT("#zielzoneSHORT6# ZIEL6", barindex-PF, zielzoneSHORT6,SansSerif,bold, 12)COLOURED(RV,GV,BV)

DRAWTEXT("#zielzonelong7# ZIEL7", barindex-PF, zielzonelong7,SansSerif,bold, 12)COLOURED(RV,GV,BV)

DRAWTEXT("#zielzoneSHORT7# ZIEL7", barindex-PF, zielzoneSHORT7,SansSerif,bold, 12)COLOURED(RV,GV,BV)

DRAWTEXT("#zielzonelong8# ZIEL8", barindex-PF, zielzonelong8,SansSerif,bold, 12)COLOURED(RV,GV,BV)

DRAWTEXT("#zielzoneSHORT8# ZIEL8", barindex-PF, zielzoneSHORT8,SansSerif,bold, 12)COLOURED(RV,GV,BV)

endif

if time >=ENDTIME and Time <=220000 then

count=count+1

DRAWsegment(barindex-count,upper,barindex,upper) coloured(RH,GH,BH)

DRAWsegment(barindex-count,lower,barindex,lower)coloured(RH,GH,BH)

DRAWsegment(barindex-count,zielzonelongI,barindex,zielzonelongI)coloured(RH,GH,BH)

DRAWsegment(barindex-count,zielzoneSHORTI,barindex,zielzoneSHORTI)coloured(RH,GH,BH)

DRAWsegment(barindex-count,zielzonelongI2,barindex,zielzonelongI2)coloured(RH,GH,BH)

DRAWsegment(barindex-count,zielzoneSHORTI2,barindex,zielzoneSHORTI2)coloured(RH,GH,BH)

DRAWsegment(barindex-count,zielzonelongI3,barindex,zielzonelongI3)coloured(RH,GH,BH)

DRAWsegment(barindex-count,zielzoneSHORTI3,barindex,zielzoneSHORTI3)coloured(RH,GH,BH)

DRAWsegment(barindex-count,zielzonelongI4,barindex,zielzonelongI4)coloured(RH,GH,BH)

DRAWsegment(barindex-count,zielzoneSHORTI4,barindex,zielzoneSHORTI4)coloured(RH,GH,BH)

DRAWsegment(barindex-count,zielzonelongI5,barindex,zielzonelongI5)coloured(RH,GH,BH)

DRAWsegment(barindex-count,zielzoneSHORTI5,barindex,zielzoneSHORTI5)coloured(RH,GH,BH)

DRAWsegment(barindex-count,zielzonelongI6,barindex,zielzonelongI6)coloured(RH,GH,BH)

DRAWsegment(barindex-count,zielzoneSHORTI6,barindex,zielzoneSHORTI6)coloured(RH,GH,BH)

else

count=0

endif

if intradaybarindex=0 then

hh = 0

ll = 0

alreadydrawn = 0

endif

if time=starttime then

startbar=barindex

endif

if time=endtime then

endbar=barindex

endif

if time>=starttime and time<=endtime then

if high>hh then

hh = high

endif

if low<ll or ll=0 then

ll = low

endif

if time>endtime and alreadydrawn=0 then

drawrectangle(startbar,hh,endbar,ll) COLOURED(RH,GH,BH,90)

alreadydrawn=1

endif

if time >=ENDTIME and Time <=220000 then

countV=countV+1

DRAWsegment(barindex-countV,upperV,barindex,upperV)COLOURED(RV,GV,BV)

DRAWsegment(barindex-countV,lowerV,barindex,lowerV)COLOURED(RV,GV,BV)

DRAWsegment(barindex-countV,zielzonelong,barindex,zielzonelong)COLOURED(RV,GV,BV)

DRAWsegment(barindex-countV,zielzoneSHORT,barindex,zielzoneSHORT)COLOURED(RV,GV,BV)

DRAWsegment(barindex-countV,zielzonelong2,barindex,zielzonelong2)COLOURED(RV,GV,BV)

DRAWsegment(barindex-countV,zielzoneSHORT2,barindex,zielzoneSHORT2)COLOURED(RV,GV,BV)

DRAWsegment(barindex-countV,zielzonelong3,barindex,zielzonelong3)COLOURED(RV,GV,BV)

DRAWsegment(barindex-countV,zielzoneSHORT3,barindex,zielzoneSHORT3)COLOURED(RV,GV,BV)

DRAWsegment(barindex-countV,zielzonelong4,barindex,zielzonelong4)COLOURED(RV,GV,BV)

DRAWsegment(barindex-countV,zielzoneSHORT4,barindex,zielzoneSHORT4)COLOURED(RV,GV,BV)

DRAWsegment(barindex-countV,zielzonelong5,barindex,zielzonelong5)COLOURED(RV,GV,BV)

DRAWsegment(barindex-countV,zielzoneSHORT5,barindex,zielzoneSHORT5)COLOURED(RV,GV,BV)

DRAWsegment(barindex-countV,zielzonelong6,barindex,zielzonelong6)COLOURED(RV,GV,BV)

DRAWsegment(barindex-countV,zielzoneSHORT6,barindex,zielzoneSHORT6)COLOURED(RV,GV,BV)

DRAWsegment(barindex-countV,zielzonelong7,barindex,zielzonelong7)COLOURED(RV,GV,BV)

DRAWsegment(barindex-countV,zielzoneSHORT7,barindex,zielzoneSHORT7)COLOURED(RV,GV,BV)

DRAWsegment(barindex-countV,zielzonelong8,barindex,zielzonelong8)COLOURED(RV,GV,BV)

DRAWsegment(barindex-countV,zielzoneSHORT8,barindex,zielzoneSHORT8)COLOURED(RV,GV,BV)

else

countV=0

endif

if intradaybarindex=0 then

hhV = 0

llV = 0

alreadydrawnV = 0

endif

if time=starttimeV then

startbarV=barindex

endif

if time=endtimeV then

endbarV=barindex

endif

if time>=starttimeV and time<=endtimeV then

if high>hhV then

hhV = high

endif

if low<llV or llV=0 then

llV = low

endif

if time>endtimeV and alreadydrawnV=0 then

drawrectangle(startbarV,hhV,endbarV,llV) COLOURED(RV,GV,BV,90)

alreadydrawnV=1

endif

RETURN upperV As"upperVV" , lowerV as" lowerVV" ,upper as"upper", lower as"lower",EROEFFNUNG AS" ERÖFFNUNG"

DAX dow jones London-Session NDX open range ORB session SPX US-Session

Risk disclosure:

No information on this site is investment advice or a solicitation to buy or sell any financial instrument. Past performance is not indicative of future results. Trading may expose you to risk of loss greater than your deposits and is only suitable for experienced investors who have sufficient financial means to bear such risk.

ProRealTime ITF files and other attachments :

Filename : download the ITF files

How to import ITF files into ProRealTime platform?

Find other exclusive trading pro-tools on

PRC is also on YouTube, subscribe to our channel for exclusive content and tutorials


hartgeld • 01/07/2019 #
Hallo Atxeel, sehr interessanter Code, habe das installiert und funktioniert. Danke! Kannst Du die Anwendung noch etwas genauer beschreiben? Bedeutet das das Hoch oder Tief vor der Eröffnung zu 100, 200 oder mehr % nach oben oder unten umgelegt werden?
- atxeel • 01/07/2019 #
  Hallo hartgeld, die Ziele sind schlicht, bspw. die Range beträgt 10 Punkte, dann ist das Ziel für Long 10 Punkte von der Range Oberkante und vice versa. Beschrieben als Ziel 1-8.

Nicolas it is based on seasonality of DAX.

Luciano Santiago Juárez Hello I am new here I am trying to understand this code IF monthlyMultiplierLong > 0 ...

Luciano Santiago Juárez Sorry the code copied bad the line I dont understand is: ELSIF monthlyMultiplierLong 0 THEN

Wing Yes, investigate as much as you want. For more insight, you can view the linet1, linet2 etc....

CKW Hi Wing, Thanks for your sharing. I am still trying to breakdown & understand your code...

Wing Hello CKW. No, the parameter, 7 in this case, is used when calling the RSI indicator to ide...

Nacho Buenos días Raul, tengo puesto este sistema desde hace unos días en una cuenta demo en la ve...

Dominik Hola Raul ... it looks wonderful :-) Why does it not work if I use less than 100,000 € capi...

Bobbi Hola y gracias por compartir! Descubrí que en 5 minutos teníamos algo muy bueno! Pero no ...

danhei Hi I am tryong to figure out how trist strategy works. I am new to pro real time. Can some...

Plop61 Hello,Thank you for sharing this beautiful strategy.Is it possible to indicate the code for ...

NoName Thank you very much for this fascinating trading system. It is still proving to be extremely...

pollon Ciao Ale, anche a me da questo errore "QQE_QUDAX1HBUY" "QQE_QUDAX1HSELL" "UNIV_QUDAX...

reb Hi Ale do you trade these QU strategies? Are the results same as backtests Thnaks in adv...

crazytrader Hi anyone that has run this lately?

larouedegann best with this hour IF TIME =081000 THEN plushaut=highest[2](high) plusbas = lowest[2](lo...

CanAny1Trade Hi! I'm trying to put together a similar indicator but struggling. I want to mark the NY Pit...

ALE Hi Pat This code was nothing more than an experiment

pat95162 Hi Ale Do you have same results as me ? The strategy works very well in 2017 and now in 2-...

Nicolas Built on the history means that it suits the history. Always develop ideas in In-Sample peri...

Elsborgtrading No that is wrong :) 1st runs always- then only run 2nd if 1st is on market with positions(ar...

Elsborgtrading It can only be fully automated if IG change minimum SLto 7 at night on DAX multi timefra...

Elsborgtrading A small example. the strategy would have opened 3 position on Dec 4th 2016 and keept it for ...

Cosmic1 @JadeDB What times are you putting in?

sincitytrader I tried this one out recently, and wasn't profitable for me.

Cosmic1 Yes, not great lately. I stopped this live at the end of last year. Will wait to see when th...

Philip Raphael Hey! Thank so much for sharing this wonderful indicator! I have always tried to code a simil...

CKW Hi Philip, What do you mean "Years" are not defined ? candle? If to code yearly candle size...

dakaodo Years not defined was probably b/c Phillip copied and pasted the code into PRT instead of im...

zilliq The reasons why I think it's time consuming and we loose time to try to do backests and Auto...

filiprb Hello Zilliq, You don't need a system to produce a walk forward test. You can easily create...

Philip Raphael It is incredible! Thanks for sharing, Doctrading!

Nicolas You should join and read the forum thread about this strategy. There are plenty of different...

Reiner Hi djtaktik and welcome, I have answered your question in the related Pathfinder forum beca...

danver34 is this version the definitive one or from the original one have there been modifications to...

Nicolas Overfit on past history obviously. But it doesn't mean that it would still underperformed in...

Francesco78 Thank you for the clarifications Nicolas, I am more aware of the meaning of the backtesting ...

CanAny1Trade Hi all, could a simple indicator be made to mark the traditional Pit based ORB? I'm tryi...

Fabio Anthony Terrenzio this strategy works only in a well defined trend

brosly Good afternoon I am trying to get the complete code of lex strategy made by adolfo since I s...

dreif123 hi Adolfo, is Alex Auto Trading Botindex working on DAX as well ? if so , can you post the...

hvluthy@sunrise.ch I'm very interested to try out your strategy, but as a bloody newbie I need some help regard...

Scalp Hola Adolfo, tengo una variante de tu estrategia, pero no se programar, me puedes ayudar al ...

ALZ Hi, I tested this strategy and that doesn't work.. strategy is losing.. Does anyone curr...

Nicolas Ahah, I'm not the author of this one :) I know you are a great coder Wilko, why don't you p...

Wilko Thanks for the flattery! I will, I promise. /F

Nicolas Still don't have seen anything from your own :) You promised me! Ahaha

Andres Uffff, I didn't adjust the different index spreads. With the heavy spread of Italy It's nega...

davidp13 Good day. I know this was posted such a long time ago, but I though rebuilding the system on...

davidp13 Also to note that the one position in my code does not close the other, which as far as I kn...

Dave Hi, I'm new to coding and have been trying to modify the code a little to backtest an idea I...

Nicolas Better use the forums for coding assistance please. You'll get more results there for sure.

Dave Apologies - only just learning the site layout. Maybe you could delete the post?

iBox – Open Range for London and US Session

Share this

Likes