Optimized Trend Tracker OTT

Optimized Trend Tracker OTT

Optimized Trend Tracker OTT is an indicator that provides traders to find an existing trend or in another words to see which side of the current trend we are on.

We are under the effect of the uptrend in cases where the prices are above OTT ,
under the influence of a downward trend, when prices are below OTT.

The first parameter in the OTT indicator set by the two parameters is the period/length.

OTT will be much sensitive to trend movements if it is smaller. And vice versa, will be less sensitive when it is longer.

As the period increases it will become less sensitive to little trends and price actions.

In this way, your choice of period, will be closely related to which of the sort of trends you are interested in.

The OTT percent parameter in OTT is an optimization coefficient. Just like in the period
small values ​​are better at capturing short term fluctuations, while large values
will be more suitable for long-term trends.

In addition, when OTT is used with the support line in it, buy and sell signals
it will become a producing indicator.

You can use OTT default alarms and Buy Sell signals like:

1-
BUY when Prices are above OTT
SELL when Prices are below OTT

2-
BUY when OTT support Line crosses over OTT line.
SELL when OTT support Line crosses under OTT line.

3-
BUY when OTT line is Green and makes higher highs.
SELL when OTT line is Red and makes lower lows.

Text from his author: KivancOzbilgic

Share this

Risk disclosure:

No information on this site is investment advice or a solicitation to buy or sell any financial instrument. Past performance is not indicative of future results. Trading may expose you to risk of loss greater than your deposits and is only suitable for experienced investors who have sufficient financial means to bear such risk.

ProRealTime ITF files and other attachments : How to import ITF files into ProRealTime platform?

PRC is also on YouTube, subscribe to our channel for exclusive content and tutorials

  1. MaoRai54 • 02/15/2024 #

    Hi, many thanks for this indicator but it doesn’t work. Need to define the AverageTypeVAR

  2. Iván • 02/15/2024 #

    Hi! If you download the indicator the variable will be defined. Anyway here you have again with default parameters:

  3. Iván • 02/15/2024 #

    //PRC_Optimized Trend Tracker | indicator
    //version = 0
    //14.02.24
    //Iván González @ http://www.prorealcode.com
    //Sharing ProRealTime knowledge
    ////developer: ANIL ÖZEKŞİ
    //////inputs
    src = customclose
    length = 2 //OTT period
    percent = 1.4 //OTT percent
    showsupport = 1 //Show Support Line
    showsignalsk = 1 //Show Support Line Crossing Signals
    showsignalsc = 0 //Show Price/OTT Crossing Signals
    highlight = 0 //Show OTT Color Changes
    highlighting = 1 //Highlighter On/Off
    AverageTypeVAR = 1 // use VAR average
    mav = 1 //Moving Average Type
    ///////indicator
    ////VAR
    if barindex < 9 then
    var = src
    else
    valpha=2/(length+1)
    if src > src[1] then
    vud1= src-src[1]
    vdd1= 0
    elsif src < src[1] then
    vud1= 0
    vdd1=src[1]-src
    else
    vud1=0
    vdd1=0
    endif
    vUD=summation[9](vud1)
    vDD=summation[9](vdd1)
    vCMO=(vUD-vDD)/(vUD+vDD)
    VAR=(valpha*abs(vCMO)*src)+(1-valpha*abs(vCMO))*VAR[1]
    endif
    if barindex < length then
    Mavg = src
    dir = 1
    else
    if AverageTypeVAR then
    Mavg = var
    else
    Mavg=average[length,mav](src)
    endif
    fark = Mavg*percent*0.01

    longStop = Mavg – fark
    longStopPrev = longStop[1]

    if Mavg > longStopPrev then
    longStop = max(longStop,longStopPrev)
    else
    longStop = longStop
    endif

    shortStop = Mavg + fark
    shortStopPrev = shortStop[1]

    if Mavg < shortStopPrev then
    shortStop = min(shortStop,shortStopPrev)
    else
    shortStop = shortStop
    endif

    if dir = -1 and Mavg > shortStopPrev then
    dir = 1
    elsif dir = 1 and Mavg < longStopPrev then
    dir = -1
    else
    dir = dir[1]
    endif
    endif

    if dir = 1 then
    MT = longStop
    else
    MT = shortStop
    endif

    if Mavg > MT then
    OTT = MT*(200+percent)/200
    else
    OTT = MT*(200-percent)/200
    endif

    pALL = OTT[2]
    ///////////OTT colors
    if highlight then
    if OTT[2]>OTT[3] then
    r=76
    g=175
    b=80
    else
    r=255
    g=82
    b=82
    endif
    else
    r=184
    g=0
    b=117
    endif
    //////////print signals
    buysignal = Mavg crosses over OTT[2]
    sellsignal = Mavg crosses under OTT[2]

    if buysignal and showsignalsk then
    drawarrowup(barindex,low-0.25*averagetruerange[10](close))coloured(“green”)
    elsif sellsignal and showsignalsk then
    drawarrowdown(barindex,high+0.25*averagetruerange[10](close))coloured(“red”)
    endif

    buySignalc = src crosses over OTT[2]
    sellSignallc = src crosses under OTT[2]

    if buySignalc and showsignalsc then
    drawtext(“▲”,barindex,low-0.25*averagetruerange[10](close))coloured(“green”)
    elsif sellSignallc and showsignalsc then
    drawtext(“▼”,barindex,high+0.25*averagetruerange[10](close))coloured(“red”)
    endif

    if Mavg > OTT then
    r1=0
    g1=250
    b1=0
    else
    r1=250
    g1=0
    b1=0
    endif

    mplot = (high+low+close+open)/4

    if highlighting then
    colorbetween(mplot,pALL,r1,g1,b1,40)
    endif

    return Mavg*showsupport as “Media” coloured(0,0,250)style(dottedline,2),pALL as “OTT”coloured(r,g,b)style(line,2)

  4. MaoRai54 • 02/15/2024 #

    Thanks, now it’s OK. in your first code at line 15-16 it’s missing.

  5. Madrosat • 02/15/2024 #

    Hello Ivan
    Did you try a strategy with this indicator

  6. Iván • 02/15/2024 #

    Hi. No I didn’t. This is a code translation requested by an user a few days ago.

avatar
Register or

Likes

avatar avatar avatar avatar
Related users ' posts
Wing Yes, investigate as much as you want. For more insight, you can view the linet1, linet2 etc....
CKW Hi Wing, Thanks for your sharing. I am still trying to breakdown & understand your code...
Wing Hello CKW. No, the parameter, 7 in this case, is used when calling the RSI indicator to ide...
Nicolas Je vais faire l'indicateur et expliquer comment en même temps dans un sujet de forum. Plus s...
gregus merci nicolas toute ma gratitude est pour toi sa sera bien pratique car je pense ne pas etre...
Nicolas Ok merci donc d'ouvrir un sujet spécifique pour cette demande donc :) 
algotrader This indicator looks coolBut on attempt to use it for a strategy dev'I get an error.."The in...
dajvop @algotrader if you at the bottom of the code add: RETURN Buffer1 as "up", Buffer2 as "down",...
Bateson Si cela peut servir, l'indicateur Sadukey a été créé en utilisant un générateur de filtre ap...
Nicolas Thanks for contributing to the "ichimoku section" of the prorealtime code library Don't he...
sourberry Thank you , this is a great indicator works beautifully. Could you kindly modify to scr...
pp_playaflamenca Excuse me,... reading your code about spanB: [ SenkouSpanBFutureW = (Highest[SenkouSpanPerio...
Nicolas
9 years ago
ALMA MACD
ALMA MACD
7
Indicators
Arnaud HALVICK Great indicator, thank you!
JMat45 Hi Nicolas, just reviewing this indicator and noticed that you have double assigned the vari...
Nicolas That would not make any difference because the code is read from top to bottom.
Mansoor What does COI stand for?
MikeGC Hi Mansoor, COI is the abbreviation for the Coppock indicator.
nonetheless Anyone interested in this strategy please see forum topic: https://www.prorealcode.com/topic...
MikeGC I don't know if you have used the variables a and b to optimise the parameters for the Super...
gianpiero75 I have not optimized, I multiplied the parameters for 6 (5,8), to use them on the 4  hoursTF...
bertrandpinoy bonjour Mike j utilise TrendChaser V2.0 et quand il prend position cela ne programme pas le ...
zilliq The reasons why I think it's time consuming and we loose time to try to do backests and Auto...
filiprb Hello Zilliq, You don't need a system to produce a walk forward test. You can easily create...
Philip Raphael It is incredible! Thanks for sharing, Doctrading!
eisi If i switch between different Markets, the Backgroundcolour will appear where it should not...
datageek How can I get alerts on colour change?
NAMBO40 Hello, I would like to add a 25 period SMA moving average. It's possible?
Yannick Thanks for sharing. This strategy is flat for 11 years and winning afterwards. Don't you thi...
Doctrading Hello, As I usually say, strategies are exposed to be improved :) So yes, I think there mu...
Lior Green Doesn't work for me. Set values “compra” and “venta” to be shown as HISTOGRAM
Fabio Anthony Terrenzio this strategy works only in a well defined trend
brosly Good afternoon I am trying to get the complete code of lex strategy made by adolfo since I s...
dreif123 hi Adolfo, is Alex Auto Trading Botindex working on DAX as well ? if so , can you post the...
Doctrading I forgot to write at the beginning :  a = 50 b = 50 These are intermediate levels Sorry
DerPat Thank you. This one could be an aid in my current research on stochastics.
Pelayo it is possible that in line 12 we should put seuilinf=-b, thaks for all
Doctrading Hello, Someone asked me something (his results seemed to be different) on my email, but it ...
Glen Marquis Not your best..So what is your best strategy? :)
TradSuz C'est étrange, je note donc à nouveau les deux horaires achat et vente =9H/17H, le iRSI de l...
TradSuz Merci à Doctrading pour cette trame de code super et qui marche sur d'autres supports aussi....
Bibi83 Bonsoir à tous Juste pour vous informer que j'ai enlever les conditions short et que cela ...
GraHal Hi Nicolas I like this and would like to understand it fully so please forgive the (maybe) d...
Nicolas Hi GraHal, the Factor parameter is only a multiplier of the ATR that is added or subtracted ...
GraHal Nicolas, thank you for your useful and informative response. Yes I optimise using ProBackte...
Denis Hello, Congratulations and thank you for this work. I do not understand one thing, however...
Nicolas
9 years ago
GraHal Hi Nicolas Britains .itf file didn't work for me ... I had to change h to hh at line 13 and...
Nicolas Thank you GraHal for pointing this error, i have corrected the code in the file. The code in...
Nicolas
9 years ago

Top