Scatter Plot Analysis of RSI, Stochastic, Williams%R and ADX

v11
Scatter Plot Analysis of RSI, Stochastic, Williams%R and ADX

This indicator can analyse the four indicators RSI, Stochastic, Williams%R and ADX and present the results in a scatter chart.

This indicator only works on PRTv11 onwards.

Each of these bounded indicators returns a result between zero and 100. Every candles returned value is calculated rounded up and then a win rate and profit and loss calculated on where price was ‘BarsAfter’ candles later and stored for that returned indicator value. The results are further separated into results for if our tested candle was a red candle or a green candle. The results are then displayed in a scatter chart and also as text to the left of the scatter chart. Sample size is also calculated and displayed so that we can see how big a sample the results are calculated on.

So for example on the DJI daily if we check the RSI indicator and base our calculations on 2 bars after we can see that if the RSI returned a value of 35 (actually >34 and <=35) then we had 192 candles in our history with an RSI value of 35 with 57 of them being green and 135 red. We can then also see the win rate for if we went long on green candles with RSI=35 and exited after two bars or short on green candles with RSI=35 and exited after two bars – and the same for long on red or short on red.

If we switch ‘ProfitLoss’ on then the scatter chart changes so we can see how much each trade direction would have won or lost. The scatter chart y axis is calculated to represent the most profitable indicator value return at 100% and the worst at 0%.

The x axis always represents the indicator returned values between zero and 100.

The indicator has two modes. ‘Live’ or not live. In Live mode the results and scatter plot display change to only show results for the current candle colour and current chosen indicator return value for the current candle. In ‘Not Live’ mode you can enter a ‘Value’ and check the results for any indicator returned value for any colour candle. In ‘Live’ mode the blue line represents the current candles indicator returned value location on the scatter chart and it will move up and down as this changes. The points at the top and bottom of the blue line change colour from red to green depending on current candle colour. In ‘Not Live’ mode the points of the line are blue and the blue line is located on whatever you have set ‘Value’ to be.

You can set a ‘Spread’ to be used in the profit and loss calculations. Spread is not taken into account when calculating the win rates however.

You can also set ‘DecimalPlaces’ to display more or less decimal places in the profit and loss displayed results.

Set ‘p’ to whatever period of your chosen indicator you want to analyse.

There are four tick boxes to choose an indicator. If no boxes are ticked then the default is RSI but if you tick more than one box then the order of display priority is ADX then Williams%R then Stochastic.

As always I advise downloading and importing to get full functionality.

Share this

Risk disclosure:

No information on this site is investment advice or a solicitation to buy or sell any financial instrument. Past performance is not indicative of future results. Trading may expose you to risk of loss greater than your deposits and is only suitable for experienced investors who have sufficient financial means to bear such risk.

ProRealTime ITF files and other attachments : How to import ITF files into ProRealTime platform?

PRC is also on YouTube, subscribe to our channel for exclusive content and tutorials

  1. Vinks_o_7 • 04/06/2020 #

    Vonasi you’re a beast !!! ;-)))

  2. pableitor • 04/06/2020 #

    Amazing indicator , you are pushing PRT to the limit! But looking at the scatter its not clear to me how can we interpret the plot , I mean should we look for some kind of linear correlation between x/y ?

avatar
Register or

Likes

avatar avatar avatar avatar avatar
Related users ' posts
Francesco78 Hi Pepmartorell, please let's continue the discussion on the forum thread so that we can sha...
Francesco78 Hi Pepmartorell, please let's continue the discussion on the forum thread so that we can sha...
Jusmih1 Hi there, i am looking at your Strategy however when you put in automatic trading mode its ...
finplus Thanks for the job. Which variables do you suggest for timeframe 1 hour? 
Maz Depends massively on your market and the volatility. I suggest using the variable optimizer ...
1Randy This a great momentum filter! I would like to see volume momentum incorporated into the indi...
majid52026 Hi I want MBXF Timing for mq5 Does anyone have this indicator???
dertopen Hi Nicolas good work for the code translation when i chek the mbfx system site i see in t...
Nicolas Yes, just change the color by yourself in the indicator settings window.
Nicolas All conditions under parenthesis for the c1 to c4 conditions should be inverted. 
tomus Can you give an example of the overbought codes please? Thanks.
ams123 Frank Merci Nicholas -:)
Djo Not working on V11. The RSI doesn't appear on the chart.
Mika83 Bonjour, J'ai des soucis de lecture de syntaxe avec la variable "drawsegment" sur la versio...
seb234 Salut Mika, j'ai la version V11.1, la formule fonctionne. Mais il est préférable, dixit Nico...
bolsatonimora2 Hi, nice indicator, it´s possible to include a middle line with 50 value? ty!
gabri Hi, EMA26 approximate almost exactly the 50% line
Alain Wilder MA is exactly the 50% line
wtangsiri Bonjour J'ai importé le fichier ITF en question, mais cela me donne, en bas de l'écran, un...
Nicolas Il faut ajouter l'indicateur sur le graphique du prix.
skuggan89 This is a great indicator, works very well!! Is there any algo based on this indicator that ...
owes29 Hi is there anyway to develop this for the pro scanner on daily or hourly scans. so it woul...
Nicolas Of course, please add a query in the proscreener forum.
Bruno Carnazzi C'est dommage, cette histoire d'énergie fractale bousille complètement la précision de l'ind...
wtangsiri Bonsoir Qu'appelez vous l'axe vertical et comment le définir ? Merci pour votre aide.
rafadonl2 Pardonnez-moi mais je ne sais pas ce que vous entendez par "axe vertical". Serait-ce la lig...
rafadonl2 Je viens de voir ce que vous voulez dire. Comme pour tout autre indicateur, vous devez défin...
gregus bonjour a tous quelqu un pourait il recodé en prt il sagit  du dynamique zone ma, je n arri...
Nicolas Merci de faire une requête spécifique sur le forum. 
Nicolas
8 years ago
StepRSI
StepRSI
5
Indicators
Nicolas Thanks for this modification, I still do not have tested it, where did you get this idea to ...
rfsteve Trial and error from study of indicators call it coding mad science was trying to find an in...
Maxime Baudin Nice! Thanks :)
Nicolas
8 years ago
GraHal Forked code I mention above is here ... GraHal wrote: So below is the PRC Stochastic RSI v...
GraHal Try again (quite limited what you can do as Comments in the Library) https://www.prorealco...
AutoFlanders Thanks GraHal, that's what i was looking for
Etienne Hi, I'm quite late in this thread. I'd just like to propose an enhancement because this in...
Nicolas Thanks Etienne.
Bard Hi Nicolas, I wanted to make this scaled indicator above between -1 and +1 instead of 0 to +...
Madrosat Bonjour Nicolas Je souhaiterais faire colorier le fond du graphique supérieur en vert lorsq...
Nicolas Merci d'ouvrir un sujet dans le forum approprié.
Nwab Hello Mr Nicolas.. Please how can I set this up as an indicator to work on mt5. Your guidan...
Dimi.A Awesome mate.
mora87 Hi David and Nicola, I'd like to share idea with you guys which is related to David's Idea. ...
Nicolas Please ask for custom coding in forums instead.
jeanphi0034 Hello, I would like to use the QQE indicator which is based on smooth RSI as far as I unders...
ilstefano Bonjour Nicolas, te serait il possible de rajouter la fast ATR manquante dans le code? Merci
Nicolas Désolé je ne comprends pas la question ?

Top