Scatter Plot Analysis of RSI, Stochastic, Williams%R and ADX

v11
Scatter Plot Analysis of RSI, Stochastic, Williams%R and ADX

This indicator can analyse the four indicators RSI, Stochastic, Williams%R and ADX and present the results in a scatter chart.

This indicator only works on PRTv11 onwards.

Each of these bounded indicators returns a result between zero and 100. Every candles returned value is calculated rounded up and then a win rate and profit and loss calculated on where price was ‘BarsAfter’ candles later and stored for that returned indicator value. The results are further separated into results for if our tested candle was a red candle or a green candle. The results are then displayed in a scatter chart and also as text to the left of the scatter chart. Sample size is also calculated and displayed so that we can see how big a sample the results are calculated on.

So for example on the DJI daily if we check the RSI indicator and base our calculations on 2 bars after we can see that if the RSI returned a value of 35 (actually >34 and <=35) then we had 192 candles in our history with an RSI value of 35 with 57 of them being green and 135 red. We can then also see the win rate for if we went long on green candles with RSI=35 and exited after two bars or short on green candles with RSI=35 and exited after two bars – and the same for long on red or short on red.

If we switch ‘ProfitLoss’ on then the scatter chart changes so we can see how much each trade direction would have won or lost. The scatter chart y axis is calculated to represent the most profitable indicator value return at 100% and the worst at 0%.

The x axis always represents the indicator returned values between zero and 100.

The indicator has two modes. ‘Live’ or not live. In Live mode the results and scatter plot display change to only show results for the current candle colour and current chosen indicator return value for the current candle. In ‘Not Live’ mode you can enter a ‘Value’ and check the results for any indicator returned value for any colour candle. In ‘Live’ mode the blue line represents the current candles indicator returned value location on the scatter chart and it will move up and down as this changes. The points at the top and bottom of the blue line change colour from red to green depending on current candle colour. In ‘Not Live’ mode the points of the line are blue and the blue line is located on whatever you have set ‘Value’ to be.

You can set a ‘Spread’ to be used in the profit and loss calculations. Spread is not taken into account when calculating the win rates however.

You can also set ‘DecimalPlaces’ to display more or less decimal places in the profit and loss displayed results.

Set ‘p’ to whatever period of your chosen indicator you want to analyse.

There are four tick boxes to choose an indicator. If no boxes are ticked then the default is RSI but if you tick more than one box then the order of display priority is ADX then Williams%R then Stochastic.

As always I advise downloading and importing to get full functionality.

Share this

Risk disclosure:

No information on this site is investment advice or a solicitation to buy or sell any financial instrument. Past performance is not indicative of future results. Trading may expose you to risk of loss greater than your deposits and is only suitable for experienced investors who have sufficient financial means to bear such risk.

ProRealTime ITF files and other attachments : How to import ITF files into ProRealTime platform?

PRC is also on YouTube, subscribe to our channel for exclusive content and tutorials

  1. Vinks_o_7 • 04/06/2020 #

    Vonasi you’re a beast !!! ;-)))

  2. pableitor • 04/06/2020 #

    Amazing indicator , you are pushing PRT to the limit! But looking at the scatter its not clear to me how can we interpret the plot , I mean should we look for some kind of linear correlation between x/y ?

avatar
Register or

Likes

avatar avatar avatar avatar avatar
Related users ' posts
rpreviteri Hi Nicolas, thanks a  loto for sharing your knowliedge, Wasn't the original momentum pinball...
air Thank you!  
elanoa Buonasera sig. Nicolas......sarebbe possibile far in modo che quando l'indicatore raggiunga ...
MikeGC I don't know if you have used the variables a and b to optimise the parameters for the Super...
gianpiero75 I have not optimized, I multiplied the parameters for 6 (5,8), to use them on the 4  hoursTF...
bertrandpinoy bonjour Mike j utilise TrendChaser V2.0 et quand il prend position cela ne programme pas le ...
Naren Yanan what is    diplus  diminus  please
Barney Has anyone tested this algon now when PRT 10.3 was released?
Yngve does anyone know if the issue with the TP/SL is resolved ?
zilliq The reasons why I think it's time consuming and we loose time to try to do backests and Auto...
filiprb Hello Zilliq, You don't need a system to produce a walk forward test. You can easily create...
Philip Raphael It is incredible! Thanks for sharing, Doctrading!
s00071609 Hi, could you please suggest, what this codes gives, lowest[b](rsi[a]) -- just trying to us...
Nicolas lowest[b](rsi[a]) returns the lowest values of the RSI of "a" periods, over the last "b" per...
s00071609 Hi, what would be the code to get the price for last bullish DTOSC cross over. I am looking ...
xel @DerPat - I don't see any question regarding the indicator.  Anyway, I think I give enough l...
diegofe_2000 Xel, tu eres el creador de este indicador? Bueno te  cuento que es muy bueno para hacer est...
xel Buen día @diegofe_2000 -  Claro, mandalo y por aquí lo probamos en otros instrumentos y si g...
Doctrading I forgot to write at the beginning :  a = 50 b = 50 These are intermediate levels Sorry
DerPat Thank you. This one could be an aid in my current research on stochastics.
Pelayo it is possible that in line 12 we should put seuilinf=-b, thaks for all
Doctrading It works on ProRealTime CFD, but backtest begins since May 2014
alex224 Hola Andres, buen trabajo. Algun problema por usar la estrategia con acciones en time frame ...
Andres Hola Alex, no lo he probado en otros timeframes, pero con esta configuración específica no c...
Nicolas RSI is an oscillator made for price centering. This strategy bet on mean reverting phenomena...
air Good start. Works decently during stock runaway bull market. I have tested it over 80 year p...
TheHovisTrader Hi - the way Larry trades it does not work - discovered that over 10 years ago! BUT If you ...
Glen Marquis I wonder how this fairs on 5 or 15 mins. Maybe 21 or 25 instead of 14 .
Doctrading Hello, you can test it. It's not my best strategy... but I think someone can improve it.
Investment Account Wow great thanks ... looks good! Do I set the colour shades up from within the indicator 's...
avatar
Anonymous Thanks for your comments and yes, that is exactly how I set up the colour levels.
Vish Thanks I have added this in my watch list. Has anyone tried it yet ? Does it work on currenc...
Nicolas
9 years ago
lokbuscas Or in weekly??
Nicolas I don't know, you should make your own studies.
lokbuscas Ok thanks Nico
Nicolas Aucune immobilisation du capital. Quel est le drawdown du buy & hold ? Je ne l'ai pas ca...
jctrader ok pour le codage mais le choix "indice" n'est pas le bon : moins de 5%/an pour le meilleur ...
Thomas Hi Nicloas nice one i do understand :D im trying to put in MA200 as a criteria so it only go...
Nicolas
9 years ago
Vinks_o_7 great, thanks Nicolas !
Vinks_o_7 argh...still nothing even with 10 000 bars on daily or hourly basis...
Vinks_o_7 ok now : had to refresh the indicator.

Top