Trendfollower EUR/USD 5M

Trendfollower EUR/USD 5M

The algorithm is searching for situations, where the range of the last 8 bars is wider than 60 pips. Opens a long position if the close is above and a short positions if the close is below the range.

Unfortunately I only have backtest data since 11/2015 for the 5 minute chart. Maybe somebody can backtest with more data? Thanks!

 

Share this

Risk disclosure:

No information on this site is investment advice or a solicitation to buy or sell any financial instrument. Past performance is not indicative of future results. Trading may expose you to risk of loss greater than your deposits and is only suitable for experienced investors who have sufficient financial means to bear such risk.

ProRealTime ITF files and other attachments : How to import ITF files into ProRealTime platform?

PRC is also on YouTube, subscribe to our channel for exclusive content and tutorials

  1. Elsborgtrading • 05/03/2017 #

    Thumbs up for considering your stop loss and take profit that generates RR more that 1
    Cheers Kasper

  2. juanj • 05/03/2017 #

    Here is another spin on your code that aslo works nicely;
    // Timeframe M5
    // EURUSD (IG - Markets)
    // Spread 2 pips

    DEFPARAM CumulateOrders = False
    DEFPARAM FLATBEFORE = 080000
    DEFPARAM FLATAFTER = 220000

    possize = 1

    rng = 0
    HighestClose = close[8]
    LowestClose = close[8]
    pips = 0.0019

    For i = 1 to 8 Do
    IF (abs(close-open[i]) > pips) THEN
    rng = rng + 1
    EndIf

    If close[i] > HighestClose then
    HighestClose = high[i]
    ElsIf close[i] < LowestClose then
    LowestClose = close[i]
    EndIf
    Next

    If rng >= 4 and (abs(close-open) > pips) then

    IF close > HighestClose THEN
    BUY possize CONTRACTS AT MARKET
    ElsIF close < LowestClose THEN
    SELLSHORT possize CONTRACTS AT MARKET
    ENDIF

    EndIf

    SET STOP pLOSS 50
    SET TARGET pPROFIT 225
     

    • avatar
      bjoern • 05/03/2017 #

      Thanks!!!

  3. juanj • 05/03/2017 #

    Here are another small tweak (just check Flatafter time as I am in a different timezone);
    // Timeframe M5
    // EURUSD (IG - Markets)
    // Spread 2 pips

    DEFPARAM CumulateOrders = False
    DEFPARAM FLATBEFORE = 080000
    DEFPARAM FLATAFTER = 220000

    possize = 5
    f = 12
    pips = 0.0019
    rng = 0
    HighestClose = close[f]
    LowestClose = close[f]

    For i = 1 to f Do
    IF (abs(close-open[i]) > pips) THEN
    rng = rng + 1
    EndIf

    If close[i] > HighestClose then
    HighestClose = high[i]
    ElsIf close[i] < LowestClose then
    LowestClose = close[i]
    EndIf
    Next

    If rng >= 4 and (abs(close-open) > pips) then

    IF close > HighestClose THEN
    BUY possize CONTRACTS AT OPEN + averagetruerange[f](close) stop
    SELLSHORT possize CONTRACTS AT OPEN - averagetruerange[f](close)*3 stop
    ElsIF close < LowestClose THEN
    SELLSHORT possize CONTRACTS AT OPEN - averagetruerange[f](close) stop
    BUY possize CONTRACTS AT OPEN + averagetruerange[f](close)*3 stop
    ENDIF

    EndIf

    SET STOP pLOSS 50
    SET TARGET pPROFIT 320
     

  4. juanj • 05/03/2017 #

    Also change the ATR multiplier to 2 instead of 3. Slightly better drawdown.

  5. imokdesign • 05/03/2017 #

    Hi Everybody,
    when I look at the strategy I felt the need to implement a Moneymanagement-System. Because I cant Prog this by myself, I took Kasper’s reinvestment version Code from “ALE’s Fractals breakout intraday Strategy EUR/USD 1H” and ty to implement it. Mayby it looks a little bit rudimentary, but it seems to be working! I couldn’t believe my eyes! I also take some different Numbers. Does someone get similar results (Spread: 1,5 Pips)?
     
    Here is the code:
     
    // Timeframe M5// Timeframe M5
    // EURUSD (IG - Markets)
    // Spread 2 pips

    DEFPARAM CumulateOrders = False
    DEFPARAM FLATBEFORE = 080000
    DEFPARAM FLATAFTER = 210000

    Reinvest=1
    if reinvest then
    Capital = 10000
    Risk = 1//0.1//in % pr position
    StopLoss = 26
    REM Calculate contracts
    equity = Capital + StrategyProfit
    maxrisk = round(equity*(Risk/100))
    MAXpositionsize=5000
    MINpositionsize=1
    Positionsize= MAX(MINpositionsize,MIN(MAXpositionsize,abs(round((maxrisk/StopLoss)))))//*Pointsize))))
    else
    Positionsize=1
    StopLoss = 26
    Endif

    IF (abs(close-open[2]) > 0.006) THEN
    IF (close > open[2]) THEN
    BUY positionsize CONTRACT AT MARKET
    set stop loss stoploss*pointsize
    SET TARGET pPROFIT 191
    ENDIF

    IF (close < open[2]) THEN
    SELLSHORT positionsize CONTRACT AT MARKET
    set stop loss stoploss*pointsize
    SET TARGET pPROFIT 191
    ENDIF
    ENDIF
    I would like to upload a picture but for some reason it did not work.
    Results in 3 Jears on 15min Timeframe (EUR/USD) from Juli 2015 till now: From 10.000 to 22.344 $ (without MM)From 10.000 to 236.428 $ (with MM)
     

  6. Inertia • 05/03/2017 #

    <// Timeframe M15
    // EURUSD (IG - Markets)
    // Spread 2 pips

    DEFPARAM CumulateOrders = False
    DEFPARAM FLATBEFORE = 080000
    DEFPARAM FLATAFTER = 210000

    TS = 25 // 35 default
    SL = 50
    PT = 80
    m = 8 // 8 default

    once startpositionsize=1
    once positionsize=startpositionsize
    once flatoverweekends=1
    once startequity=0
    once Reinvest=1

    if reinvest then
    //------------ Fixed fraction money management ----------
    once multiplier=1
    once delta=100 // newlevel then
    multiplier=multiplier+1
    oldlevel=newlevel
    newlevel=strategyprofit+startequity+multiplier*fraction
    positionsize=multiplier*startpositionsize
    elsif strategyprofit+startequity=2 then
    newlevel=strategyprofit+startequity
    oldlevel=strategyprofit+startequity-multiplier*fraction
    multiplier=multiplier-1
    positionsize=multiplier*startpositionsize
    endif
    Endif

    if flatoverweekends then
    //————— daylight-saving corrections ——————
    if currentmonth=3 and day>=15 then
    dlc=10000
    elsif currentmonth=11 and day=(223000-dlc))
    else
    fridaynight=0
    endif

    if fridaynight then
    if longonmarket then
    sell at market
    elsif shortonmarket then
    exitshort at market
    endif
    endif

    REM Conditions to enter long hereafter
    IF (abs(close-open[m]) > 0.006) THEN
    IF (close > open[m]) THEN
    BUY positionsize CONTRACTS AT MARKET
    SET STOP pLOSS SL
    SET TARGET pPROFIT PT
    ENDIF
    ENDIF

    //trailing stop
    trailingstop = TS
    if not onmarket then
    MAXPRICE = 0
    priceexit = 0
    endif

    //LONG order
    if longonmarket then
    MAXPRICE = MAX(MAXPRICE,close) //saving the MFE of the current trade
    if MAXPRICE-tradeprice(1)>=trailingstop*pointsize then //if the MFE is higher than the trailingstop then
    priceexit = MAXPRICE-trailingstop*pointsize //set the exit price at the MFE – trailing stop price level
    endif
    endif

    //exit on trailing stop price levels
    if onmarket and priceexit>0 then
    EXITSHORT AT priceexit STOP
    SELL AT priceexit STOP
    endif

    SET STOP ploss SL//
    >

  7. Inertia • 05/03/2017 #

    Hi Bjoern, I was playing around with your code this morning (EUR/USD 5′).
    Thank you to the community for the piece of code (Despair for the MM module…).

avatar
Register or

Likes

avatar avatar avatar avatar avatar avatar avatar avatar avatar avatar avatar avatar avatar
Related users ' posts
WarningTrading Comment peut on la comparer ? comme ceci ? cela ne me donne plus le message d'erreur manque...
sally31120 Bonjour, je n'arrive pas à créer ce screener close > supertrend extended2[1] la réponse...
Nicolas voir ce sujet pour un screener basé sur Supertrend Extended: https://www.prorealcode.com/top...
TempusFugit Masala, thanks for your contribution. I don´t like the offmarket spreads neither ;) I unders...
Uveus Tempus, me da un error al validar el codigo, sobre la variable N. Al crear el indicador me ...
TempusFugit Hi Uveus, I am guessing you inserted the code of the indicator into the system code, is ...
Marcel For those who are interested, I post trade opportunities with this indicator on Twitter. (@M...
swapping Thank you for sharing, best regards
Tellie2015 tack ska du ha för dina delningar både här o twitter
Leo Hi all, I posted a new version of this indicator ( I just add arrows to spot the local maxi...
Trading_En_El_Ibex35 Muchas Gracias por compartir este interesante indicador. Un saludo
xavieralava hola gracias leo
Nicolas
8 years ago
jobswaps vaya eres increible
jobswaps sigue subiendo mas contenido
Brisvegas If it seems to good to be true it is . Any long only system started at multi year lows will...
Nicolas https://www.prorealcode.com/topic/ayuda-screener-indicador-perfect-trend-line/#post-51291
Manu L. Bonjour Nicolas, suite a une de mes precedentes demande dans le forum indicateur, j'ai touv...
AntoGH C'est selon moi le meilleur indicateur, que j'ai vu, si vous trouvez mieux dîtes moi car dif...
Jiacky mma = average[per,1](close) should be mma = average[per,1](close * 1000). Otherwise TDF will...
bolsatrilera Hi Nicolas, I have this version of the True Balance Power ,created by eykpunter on Tradingvi...
bolsatrilera and the code : REM TRUE BALANCE OF POWER // código original de eykpunter para la plataform...
rafadonl2 is not taken into account in the procedure. It considers only if it is a doji or when candle...
Guibourse Okay thanks, just a question : how do you plot your two lines in the same window as price ? ...
rafadonl2 sorry, I don't understand your question. Indicator draws Heikin Ashi candle, not price cand...
JanWd Tried the code, nice concept, seems to work quit well for US/EUR 2hrs, Other markets seems n...
JR1976 Simple and nice code , congrats !!! Seems work well with TIme frame 1 h
phanz Hi all, Sorry revisiting an old post. This algo is simple, and simplicity is the ultimate ...
Trading_En_El_Ibex35 El screener no busca acciones que estén en máximos absolutos , busca acciones en las que el...
Andraxx lo de volumen aceptable, lo dices en relación al Ibex 35 supongo. Porque se margen de volume...
Juanjo Hola Queria preguntarte si la idea de maximos anuales es tuya, o bien está basada en el sis...
Steven Bahia Hi Nicolas - great indicator - is there a way to place a alert when the Oscillator crosses ...
Nicolas Alerts can't be programmed, you have to set them yourself with the Alert tool of the platfor...
Steven Bahia just to add to this would there be a way to establish a entry price from the Oscillator
Nicolas Your PRT version is inferior to 10.3? So the code in its default state is not compatible. A ...
Mbulelo Hi Nicolas Hope all is well your side, do you have a specific strategy for the MFT Swing ...
Nicolas No I don't, try to make it on your own, or ask in forums (follow the posting rules please).
juanj And the point of violation is the close of the candle that violates the line by generating a...
juanj For the latest version of the strategy or to follow updates and developments see the thread ...
phanz i backtested it with 10K units of EURUSD 1 hour i get an equity curve that is going one way ...
Wing Not yet but I plan to.
Leo Have a look in this Forum, I got something interesting for you... https://www.prorealcode.co...
Dávid Gyalus Dear Wing, As I am a daytrader, and one of my best friend is a programmer we think your a...
JR1976 Dear Mike , your screener seem interest and simple... Do you try to envelope an automat...
Player Hi Mike, What is the name of the indicator just under the MMA ? Thanks Regards Marc
Igor Hi Mike, What is the name of the indicator just under the MMA ? Thanks Regards
EchnatonX Hallo Im Demomodus bei IG habe ich das Problem, dass oft keine Orders ausgeführt werden kön...
Jan EchnatonX, nice late answer of me: Make the stop loss a percentage of the close, like 100/...
guleny Hello I made some optimization to make it better. But there are 5 transacttion which incr...

Top