Trendfollower EUR/USD 5M

Trendfollower EUR/USD 5M

The algorithm is searching for situations, where the range of the last 8 bars is wider than 60 pips. Opens a long position if the close is above and a short positions if the close is below the range.

Unfortunately I only have backtest data since 11/2015 for the 5 minute chart. Maybe somebody can backtest with more data? Thanks!

 

Share this

Risk disclosure:

No information on this site is investment advice or a solicitation to buy or sell any financial instrument. Past performance is not indicative of future results. Trading may expose you to risk of loss greater than your deposits and is only suitable for experienced investors who have sufficient financial means to bear such risk.

ProRealTime ITF files and other attachments : How to import ITF files into ProRealTime platform?

PRC is also on YouTube, subscribe to our channel for exclusive content and tutorials

  1. Elsborgtrading • 05/03/2017 #

    Thumbs up for considering your stop loss and take profit that generates RR more that 1
    Cheers Kasper

  2. juanj • 05/03/2017 #

    Here is another spin on your code that aslo works nicely;
    // Timeframe M5
    // EURUSD (IG - Markets)
    // Spread 2 pips

    DEFPARAM CumulateOrders = False
    DEFPARAM FLATBEFORE = 080000
    DEFPARAM FLATAFTER = 220000

    possize = 1

    rng = 0
    HighestClose = close[8]
    LowestClose = close[8]
    pips = 0.0019

    For i = 1 to 8 Do
    IF (abs(close-open[i]) > pips) THEN
    rng = rng + 1
    EndIf

    If close[i] > HighestClose then
    HighestClose = high[i]
    ElsIf close[i] < LowestClose then
    LowestClose = close[i]
    EndIf
    Next

    If rng >= 4 and (abs(close-open) > pips) then

    IF close > HighestClose THEN
    BUY possize CONTRACTS AT MARKET
    ElsIF close < LowestClose THEN
    SELLSHORT possize CONTRACTS AT MARKET
    ENDIF

    EndIf

    SET STOP pLOSS 50
    SET TARGET pPROFIT 225
     

    • avatar
      bjoern • 05/03/2017 #

      Thanks!!!

  3. juanj • 05/03/2017 #

    Here are another small tweak (just check Flatafter time as I am in a different timezone);
    // Timeframe M5
    // EURUSD (IG - Markets)
    // Spread 2 pips

    DEFPARAM CumulateOrders = False
    DEFPARAM FLATBEFORE = 080000
    DEFPARAM FLATAFTER = 220000

    possize = 5
    f = 12
    pips = 0.0019
    rng = 0
    HighestClose = close[f]
    LowestClose = close[f]

    For i = 1 to f Do
    IF (abs(close-open[i]) > pips) THEN
    rng = rng + 1
    EndIf

    If close[i] > HighestClose then
    HighestClose = high[i]
    ElsIf close[i] < LowestClose then
    LowestClose = close[i]
    EndIf
    Next

    If rng >= 4 and (abs(close-open) > pips) then

    IF close > HighestClose THEN
    BUY possize CONTRACTS AT OPEN + averagetruerange[f](close) stop
    SELLSHORT possize CONTRACTS AT OPEN - averagetruerange[f](close)*3 stop
    ElsIF close < LowestClose THEN
    SELLSHORT possize CONTRACTS AT OPEN - averagetruerange[f](close) stop
    BUY possize CONTRACTS AT OPEN + averagetruerange[f](close)*3 stop
    ENDIF

    EndIf

    SET STOP pLOSS 50
    SET TARGET pPROFIT 320
     

  4. juanj • 05/03/2017 #

    Also change the ATR multiplier to 2 instead of 3. Slightly better drawdown.

  5. imokdesign • 05/03/2017 #

    Hi Everybody,
    when I look at the strategy I felt the need to implement a Moneymanagement-System. Because I cant Prog this by myself, I took Kasper’s reinvestment version Code from “ALE’s Fractals breakout intraday Strategy EUR/USD 1H” and ty to implement it. Mayby it looks a little bit rudimentary, but it seems to be working! I couldn’t believe my eyes! I also take some different Numbers. Does someone get similar results (Spread: 1,5 Pips)?
     
    Here is the code:
     
    // Timeframe M5// Timeframe M5
    // EURUSD (IG - Markets)
    // Spread 2 pips

    DEFPARAM CumulateOrders = False
    DEFPARAM FLATBEFORE = 080000
    DEFPARAM FLATAFTER = 210000

    Reinvest=1
    if reinvest then
    Capital = 10000
    Risk = 1//0.1//in % pr position
    StopLoss = 26
    REM Calculate contracts
    equity = Capital + StrategyProfit
    maxrisk = round(equity*(Risk/100))
    MAXpositionsize=5000
    MINpositionsize=1
    Positionsize= MAX(MINpositionsize,MIN(MAXpositionsize,abs(round((maxrisk/StopLoss)))))//*Pointsize))))
    else
    Positionsize=1
    StopLoss = 26
    Endif

    IF (abs(close-open[2]) > 0.006) THEN
    IF (close > open[2]) THEN
    BUY positionsize CONTRACT AT MARKET
    set stop loss stoploss*pointsize
    SET TARGET pPROFIT 191
    ENDIF

    IF (close < open[2]) THEN
    SELLSHORT positionsize CONTRACT AT MARKET
    set stop loss stoploss*pointsize
    SET TARGET pPROFIT 191
    ENDIF
    ENDIF
    I would like to upload a picture but for some reason it did not work.
    Results in 3 Jears on 15min Timeframe (EUR/USD) from Juli 2015 till now: From 10.000 to 22.344 $ (without MM)From 10.000 to 236.428 $ (with MM)
     

  6. Inertia • 05/03/2017 #

    <// Timeframe M15
    // EURUSD (IG - Markets)
    // Spread 2 pips

    DEFPARAM CumulateOrders = False
    DEFPARAM FLATBEFORE = 080000
    DEFPARAM FLATAFTER = 210000

    TS = 25 // 35 default
    SL = 50
    PT = 80
    m = 8 // 8 default

    once startpositionsize=1
    once positionsize=startpositionsize
    once flatoverweekends=1
    once startequity=0
    once Reinvest=1

    if reinvest then
    //------------ Fixed fraction money management ----------
    once multiplier=1
    once delta=100 // newlevel then
    multiplier=multiplier+1
    oldlevel=newlevel
    newlevel=strategyprofit+startequity+multiplier*fraction
    positionsize=multiplier*startpositionsize
    elsif strategyprofit+startequity=2 then
    newlevel=strategyprofit+startequity
    oldlevel=strategyprofit+startequity-multiplier*fraction
    multiplier=multiplier-1
    positionsize=multiplier*startpositionsize
    endif
    Endif

    if flatoverweekends then
    //————— daylight-saving corrections ——————
    if currentmonth=3 and day>=15 then
    dlc=10000
    elsif currentmonth=11 and day=(223000-dlc))
    else
    fridaynight=0
    endif

    if fridaynight then
    if longonmarket then
    sell at market
    elsif shortonmarket then
    exitshort at market
    endif
    endif

    REM Conditions to enter long hereafter
    IF (abs(close-open[m]) > 0.006) THEN
    IF (close > open[m]) THEN
    BUY positionsize CONTRACTS AT MARKET
    SET STOP pLOSS SL
    SET TARGET pPROFIT PT
    ENDIF
    ENDIF

    //trailing stop
    trailingstop = TS
    if not onmarket then
    MAXPRICE = 0
    priceexit = 0
    endif

    //LONG order
    if longonmarket then
    MAXPRICE = MAX(MAXPRICE,close) //saving the MFE of the current trade
    if MAXPRICE-tradeprice(1)>=trailingstop*pointsize then //if the MFE is higher than the trailingstop then
    priceexit = MAXPRICE-trailingstop*pointsize //set the exit price at the MFE – trailing stop price level
    endif
    endif

    //exit on trailing stop price levels
    if onmarket and priceexit>0 then
    EXITSHORT AT priceexit STOP
    SELL AT priceexit STOP
    endif

    SET STOP ploss SL//
    >

  7. Inertia • 05/03/2017 #

    Hi Bjoern, I was playing around with your code this morning (EUR/USD 5′).
    Thank you to the community for the piece of code (Despair for the MM module…).

avatar
Register or

Likes

avatar avatar avatar avatar avatar avatar avatar avatar avatar avatar avatar avatar avatar
Related users ' posts
leofi https://www.prorealcode.com/topic/simple-average-with-visual-color/
leofi Go visit www.prorealcode.com/topic/simple-average-with-visual-color/ and watch 2em post
Dritan Hi,I am new on Prorealtime and coding.I downloaded the indi but I have it on a separate wind...
Nicolas Just add it on the price series.
yomisadiku Hello Nicolas, Can I use high and low price at lines hh=max(hh,close) and ll=min(ll,close) ...
Nicolas Yes you can do that, the impact will be that the trailing stop line will be much close to th...
Byggtrader Hi Nicolas! How do I get the indicator in the price chart? It only stays under i new chart.
Nicolas Just add it on the price chart by using the wrench on the left upper side of the chart (pric...
Dom Hello, hello....je commence le trading et découvre par la même occasion le codage....et ce n...
Nicolas Merci, ça fait plaisir !
Be-n Bonjour tout le monde ! Dans l'indicateur de tendance, j'ai du mal à saisir la nuance entre ...
Globalmarkets79 Thank you Vonasi for the answer. I have an other question. When i tried to run the indicator...
Vonasi Lines is either 0 or 1 to turn on or off the drawing of them. Once again if you download and...
Globalmarkets79 Thank you Vonasi, this indicator is very helpful!!!
Nicolas
6 years ago
Bateson Merci pour la réponse Nicolas. C'est bien ce que j'ai fait mais ça ne fonctionne toujours pa...
Enzo Paliotti Veramente ottimo, era quello che cercavo, si potrebbe modificare inserendo come variazione a...
Nicolas Perché no, chiedetelo con una descrizione dettagliata nel forum degli indicatori, per favore!
Vinks_o_7 Thanks again Vonasi !
Bard Thank you, this is a great tool @Vonasi, especially for those that used to like shorting Ind...
Aragorna Hi Vonasi, is there a reason why it does not work anymore in new version ePRT Platform? tha...
jiddan78 how to convert to afl amibroker ?
Nicolas We do not supply free coding assistance for AFL Amibroker on the website. You can ask for pa...
Ngomsi @ Vonasi, how to use timeframe , 13 minutes ,21 minutes, 34 minutes,et 55 minutes with this...
sycomore Ça ne fonctionne sur aucune valeur, je dois être trop con...
Nicolas il faut appliquer l'indicateur sur le prix.
AntoGH Je crains de ne pas comprendre... Cela indique la probabilité de la prochaine bougie ou donn...
manchokcity can we have it in mql4 platform? or how or which platform do we use it?
camporan I don't use MetaTrader so I won't be able to do the translation myself. Sorry!
Alexander9 This can for amibroker ? . Thanks
riz001 thnk u
geroniman bonjour Nicolas, j ai un indicateur le Tiger . J aiemrai placer des fleches buy et sell dire...
Nicolas Merci de formuler les demandes sur le forum. ça n'est pas le bon endroit et hors sujet ici ! ;)
avatar
Anonymous Hi robertogozzi - thank you very much for sharing this strategy. I have performed various ...
robertogozzi Thank you samsampop.
Dotan Hello guys I really appreciate this coding effort but can I use this code for Mt5 Forex Trad...
murre87 No Stoploss?
bousalahane Hi Rajesh Deshpande, Thank you for this code, I see that the code is perfect, but the posit...
Bibi83 Bonsoir à tous Je viens de backtest la stategie sur EUR/USD en graphique 1H sur 1 mois et ...
ggolfet Thanks Nicolas, I imported the itf file and solved the problem.
Hasardeur Hallo Nicolas, i tried to code the multi period heat map in combination with the Ehler’s ...
Nicolas Please open a new topic with the code in forum.
LucioleLucide Clean view, thanks for sharing
dertopen hi where i can found the window for candle configuration?
paolosab69 Ciao! . I have seen the pictures that explain this metod but i don't understand when is mome...
winnie37 yes. "No ground breaking math here, but I am finding very useful and some algo based on it i...
Jan Wind Also interesting to know what does not work, which set up you use, saves me investigating ! ...
winnie37 i just set the proorder like this: buy when 50/100/200 phase >0 and sell when under 0, go...
Vinks_o_7
6 years ago
IV Mcm I've always wondered how to make the ADX faster, thank you!
Vinks_o_7 You welcome !
Vinks_o_7 Another variation that may be more accurate : we calculate the average of normalized DI's in...
nfulcher Please could someone explain how the following code is calculated:- iDI = TEMA[3](DI[DI2]...
oakenstream Jan, I find sometimes that the priceexit variable is never set. It seems to happen when the ...
Matt66612 I do not understand the first time I launch the backtest I got the same result as you. but ...
Vonasi Yes that was the issue. I have posted an updated ITF file here: https://www.prorealcode.com/...
crolakstrading @vonasi Thank you for fixing the issue! This is a great indicator.
gregoire good evening vonasi , I had made the request to create this indicator a few years ago and I ...

Top