HELP Required – Pine Code from Trading View to PRT

• 04/27/2020 at 5:36 PM #128475
  Deltona

  Hi guys/girls….

  This is fairly difficult request to explain but I will try my hardest to be as specific as possible.

  I use Trading View and I have an indicator that I use (Paid for) and after setup it basically flags a LONG or SHORT on a chart for me, and I’ve been using these flags very successfully for trading UKOIL (Brent) on IG Index since the end of last year. I simply have an alert setup on my specific time of 210m chart. Now the trend/ribbon that fires the FLAG is what I cannot seem to get right or replicate in PRT using any of the indicators and various crossing points. I have tried all kinds of options.

  Which brings me to my next part…… I also have access to another indicator, which is very very similar, a friend of mine sent me the ‘pine code’ (Not sure where he got it from)  and I can load it to Trading View and play with it. It also fires two FLAGS but they aren’t as obvious as LONG or SHORT on the chart itself. However, I suspect they come from the same input/trends/ribbons crossing over, I just can’t identify them.

  I have access to the Pine Code in its entirety and I can narrow down the specific area which is what I believe is used for the two trend lines and the two flags, but I am not savvy enough to figure out how to get it from this code and into PRT, and then ultimately I want to take it out of the demo system and into live IG Linked account to be automated. I am confident that this will provide me with my version of the Holy Grail for what I am trading manually.

  Is there anyone who can possibly help me in my quest to automate this little gem? I can pay in virtual beers and many thanks 🙂

  Thanks in advance,

  Matt

  

  Deltona

  Participant

  Topics: 3

  Replies: 12

  Been thanked: 0 times
  04/27/2020 at 6:21 PM #128478
  Vonasi

  Deltona –

  There are some simple rules that everyone using the forums is expected to follow. Your post has broken one or more of these rules.

  The forum rules are as follows. I have highlighted in bold the rule/rules that you have not followed:

  Post your topic in the correct forum.

  ProRealTime Platform Support          only platform related issues.
  ProOrder                                                only strategy topics.
  ProBuilder                                              only indicator topics.
  ProScreener                                           only screener topics
  General Discussion                               any other topics.
  Welcome New Members                      for new forum members to introduce themselves.

  Only post in the language of the forum that you are posting in. For example English only in the English speaking forums and French only in the French speaking forums.
  Always use the ‘Insert PRT Code’ button when putting code in your posts to make it easier for others to read.
  Do not double post. Ask your question only once and only in one forum. All double posts will be deleted anyway so posting the same question multiple times will just be wasting your own time and will not get you an answer any quicker. Double posting just creates confusion in the forums.
  Be careful when quoting others in your posts. Only use the quote option when you need to highlight a particular bit of text that you are referring to or to highlight that you are replying to a particular member if there are several involved in a conversation. Do not include large amounts of code in your quotes. Just highlight the text you want to quote and then click on ‘Quote’.
  Give your topic a meaningful title. Describe your question or your subject in your title. Do not use meaningless titles such as ‘Coding Help Needed’.
  Do not include personal information such as email addresses or telephone numbers in your posts. If you would like to contact another forum member directly outside of the forums then contact the forums administrator via ‘Contact Us’ and they will pass your details on to the member that you wish to contact.
  Always be polite and courteous to others.
  Have fun.

  I have edited your post where required. Please ensure that your future posts meet these few simple forum rules. 🙂

  

  Vonasi

  Moderator

  Topics: 192

  Replies: 5088

  Been thanked: 1811 times
  04/27/2020 at 6:23 PM #128479
  Vonasi

  So basically that is a long way of saying that you would like a free code conversion.

  Just ask for one via here:

  https://www.prorealcode.com/free-code-conversion/

  You can also find that page under ‘Help’ for future reference.

  Provide as much info as you can.

  

  Vonasi

  Moderator

  Topics: 192

  Replies: 5088

  Been thanked: 1811 times
  04/27/2020 at 8:01 PM #128496
  Deltona

  Hi Vonasi,

  Sorry for the rule breach, I am brand new to this forum, and also pretty new to PRT. I wasn’t sure if it was a code request or not, and with me wanting to use the backtest in PRT I thought that was the right spot to ask.

  Should I copy the content into a new request for a code conversion?

  Thanks for your assistance.

  Matt

  

  Deltona

  Participant

  Topics: 3

  Replies: 12

  Been thanked: 0 times
  04/27/2020 at 8:29 PM #128502
  Vonasi

  Posting it here will be fine.

  

  Vonasi

  Moderator

  Topics: 192

  Replies: 5088

  Been thanked: 1811 times
  04/27/2020 at 9:03 PM #128507
  Deltona

  Vonasi,

  This post can be deleted if possible, I will reword my question and get the relevant screen shots and text prior to posting it as a proper code conversion request so as not to muddy the water.

  Cheers

  Matt

  

  Deltona

  Participant

  Topics: 3

  Replies: 12

  Been thanked: 0 times
  04/27/2020 at 9:22 PM #128509
  Vonasi

  No water has been muddied. Just post the code here and Nicolas will let you know if it is something he can convert. We prefer not to delete whole topics if we can help it.

  

  Vonasi

  Moderator

  Topics: 192

  Replies: 5088

  Been thanked: 1811 times
  04/28/2020 at 8:02 AM #128529
  Nicolas

  Please post everything required here, and I will reformat the initial post.

  

  Nicolas

  Keymaster

  Topics: 81

  Replies: 20863

  Been thanked: 4775 times
  04/28/2020 at 3:26 PM #128658
  Deltona

  Vonasi/Nicolas,

  Thanks for this, I have been trading Forex/Indices/commodities for a few years now and recently started to use the paid indicator which I found works really well in a few instances (Not all by any means!)

  Screen shot shows on the top is my paid indicator (I am using HA Candles) simply has a ribbon and flags on crossover. At the bottom of the screen is also two trend lines which cross and generate small + symbols either green for long or red for short.

  I have removed most of the other items off the bottom page for the screen shot so it is clear to see. If you add the pine script to trading view, you will see it is very cluttered. I have included a screen shot showing what I have left activated on the page so you can replicate it if needed.

  I have attached the Word documents with the pine code in them, it is as simple as copy and paste one at a time into TV Pine and they appear (As I am sure you know already) I have highlighted in RED colour text, the area I think belong to the ‘Wave Trend’ and crosses that appear, but I am not sure how to build these into a PRT system to setup and use for automation.

  Just for info, I am pretty ok at using PRT and setting up for auto systems, I have tried a few options now but I cannot seem to replicate the ribbons close enough to use them, hence this request if it is possible to duplicate them.

  In a very simplistic way, I am looking to enter a trade on the flag/crossover and exit at either the next crossover or at a TP point. To make it work on enter and exit trade at crossover, I imagine I will have to run one system for long long trades and one for shorts unless the system can simultaneously close and open a trade?

  Any further information, please don’t hesitate to ask, I am very grateful for you taking a look at this for me.

  Thanks, Matt

  

  Deltona

  Participant

  Topics: 3

  Replies: 12

  Been thanked: 0 times
  04/28/2020 at 3:34 PM #128664
  Deltona

  There is also this document for more indicators on the main chart but I don’t think there is any relevance to the ribbons/trend in the other one?

   

  

  Deltona

  Participant

  Topics: 3

  Replies: 12

  Been thanked: 0 times
• Author
  Posts