NAS scalping strategy

nonetheless · Thu, 02 Sep 2021 11:35:18 +0000

Here’s a new algo I’ve had on forward testing for a while (US Tech 100), so far consistent with the BT results. It’s all on moving averages and more or less approximates what I do in manual trading, except where I normally work on a 1min chart, this drops down to 30sec to make up for the 1 candle delay at the entry. FOR: Very nice histogram, as good as it gets. High number of trades in the BT (4 0r 5 per day) Low drawdown Spectacular ‘potential returns’ when MM is active (2nd pic – haha, dream on…🤣) Against: Very short BT, 17 months – assume it’s curve-fit to that period and would need regular reworking Possibly over-optimized (???) Stoploss is > Target profit, meaning that loss of worst trade is also > Gain of best trade – not good but unavoidable. Very low gain per trade, easily eroded with slippage or at times of higher spread. No WF, as I prefer to do out-of-sample testing in demo (closer to real trading conditions) ***Requires lengthy forward testing before going live*** As with most things in life – could be a winner, could crash and burn … who knows? Be sure to adjust the Tradetime for your time zone. // Definition of code parameters DEFPARAM CumulateOrders = false // Cumulating positions deactivated DEFPARAM preloadbars = 10000 //MONEY MANAGEMENT II MM = 0 // = 0 for optimization if MM = 0 then positionsize = 0.5 ENDIF if MM then MinSize = 0.5 // IG minimum position size allowed MaxSize = 2000 // IG tier 2 margin limit ProfitAccrued = 0 // when restarting strategy, enter profit or loss to date in instrument currency DD = 370 //MinSize drawdown in instrument currency Multiplier = 3 //drawdown multiplier if ProfitAccrued + StrategyProfit >= DD*2 then Multiplier = 2 endif Capital = DD * Multiplier Equity = Capital + ProfitAccrued + StrategyProfit PositionSize = Max(MinSize, Equity * (MinSize/Capital)) if positionsize > MaxSize then positionsize = MaxSize endif PositionSize = Round(PositionSize*100) PositionSize = PositionSize/100 ENDIF once tradetype = 1 // [1] long/short [2]long [3]short once closeonreversal = 0 DLS =(Date >= 20100314 and date <=20100328) or (Date >= 20101031 and date <=20101107) or (Date >= 20110313 and date <=20110327) or (Date >= 20111030 and date <=20111106) or (Date >= 20120311 and date <=20120325) or (Date >= 20121028 and date <=20121104) or (Date >= 20130310 and date <=20130331) or (Date >= 20131027 and date <=20131103) or (Date >= 20140309 and date <=20140330) or (Date >= 20141026 and date <=20141102) or (Date >= 20150308 and date <=20150329) or (Date >= 20151025 and date <=20151101) or (Date >= 20160313 and date <=20160327) or (Date >= 20161030 and date <=20161106) or (Date >= 20170312 and date <=20170326) or (Date >= 20171030 and date <=20171105) or (Date >= 20180311 and date <=20180325) or (Date >= 20181028 and date <=20181104) or (Date >= 20190310 and date <=20190331) or (Date >= 20191027 and date <=20191103) or (Date >= 20200308 and date <=20200329) or (Date >= 20201025 and date <=20201101) or (Date >= 20210314 and date <=20210328) or (Date >= 20211031 and date <=20211107) or (Date >= 20220313 and date <=20220327) or (Date >= 20221030 and date <=20221106) or (Date >= 20230312 and date <=20230326) or (Date >= 20231029 and date <=20231105) or (Date >= 20240310 and date <=20240331) or (Date >= 20241027 and date <=20241103) If DLS then Tradetime = time >=133000 and time <200000//UK time elsif not DLS then Tradetime = time >=143000 and time <210000//UK time endif TIMEFRAME(15 minutes) ma = average[a,t](typicalprice) cb1 = ma > ma[1] mb = average[p2,t2](typicalprice) cs1 = mb < mb[1] TIMEFRAME(5 minutes) mc = average[a3,t3](typicalprice) cb2 = (mc > ma) cb3 = mc > mc[1] md = average[a4,t4](typicalprice) cs2 = (md < mb) cs3 = md < md[1] TIMEFRAME(default) me = average[a5,t5](typicalprice) cb4 = me > me[1] and me[1] < me[2] mf = average[a6,t6](typicalprice) cs4 = mf < mf[1] and mf[1] > mf[2] CB = Tradetime and (cb1 or cb2) and cb3 and cb4 CS = Tradetime and (cs1 or cs2) and cs3 and cs4 // Conditions to enter long positions if tradetype=1 or tradetype=2 then IF not longonmarket and CB THEN BUY positionsize CONTRACT AT MARKET SET STOP %LOSS sl SET TARGET %PROFIT tp ENDIF ENDIF if tradetype=2 and longonmarket and closeonreversal and CS then sell at market endif // Conditions to enter short positions if tradetype=1 or tradetype=3 then IF not shortonmarket and CS THEN sellshort positionsize CONTRACT AT MARKET SET STOP %LOSS sls SET TARGET %PROFIT tps ENDIF ENDIF if tradetype=3 and shortonmarket and closeonreversal and CB then exitshort at market endif //% Break even (high/low) once breakeven =1 if breakeven then breakevenPC = be // long breakevenPCS = bes // short PointsToKeep = pk startBreakeven = tradeprice(1)*(breakevenPC/100) startBreakevenS = tradeprice(1)*(breakevenPCS/100) //reset the breakevenLevel when no trade are on market if breakeven>0 then IF NOT ONMARKET THEN breakevenLevel=0 ENDIF // --- BUY SIDE --- //test if the price have moved favourably of "startBreakeven" points already IF LONGONMARKET AND high-tradeprice(1)>=startBreakeven*pipsize THEN //calculate the breakevenLevel breakevenLevel = tradeprice(1)+PointsToKeep*pipsize ENDIF //place the new stop orders on market at breakevenLevel IF breakevenLevel>0 THEN SELL AT breakevenLevel STOP ENDIF // --- end of BUY SIDE --- IF SHORTONMARKET AND tradeprice(1)-low>=startBreakevenS*pipsize THEN //calculate the breakevenLevel breakevenLevel = tradeprice(1)-PointsToKeep*pipsize ENDIF //place the new stop orders on market at breakevenLevel IF breakevenLevel>0 THEN EXITSHORT AT breakevenLevel STOP ENDIF endif endif // trailing atr stop once trailingstopATR = 1 if trailingstopATR then //==================== once tsincrements = tsi // set to 0 to ignore tsincrements once tsminatrdist = tsm once tsatrperiod = tsa // ts atr parameter once tsminstop = 4 // ts minimum stop distance tssensitivity = 2 // 1 = close 2 = High/Low 3 = Low/High 4 = typicalprice (not use once) //==================== if barindex=tradeindex then trailingstoplong = tsl // ts atr distance trailingstopshort = tss // ts atr distance else if longonmarket then if tsnewsl>0 then if trailingstoplong>tsminatrdist then if tsnewsl>tsnewsl[1] then trailingstoplong=trailingstoplong else trailingstoplong=trailingstoplong-tsincrements endif else trailingstoplong=tsminatrdist endif endif endif if shortonmarket then if tsnewsl>0 then if trailingstopshort>tsminatrdist then if tsnewsl<tsnewsl[1] then trailingstopshort=trailingstopshort else trailingstopshort=trailingstopshort-tsincrements endif else trailingstopshort=tsminatrdist endif endif endif endif tsatr=averagetruerange[tsatrperiod]((close/10))/1000 //tsatr=averagetruerange[tsatrperiod]((close/1)) // (forex) tgl=round(tsatr*trailingstoplong) tgs=round(tsatr*trailingstopshort) if not onmarket or ((longonmarket and shortonmarket[1]) or (longonmarket[1] and shortonmarket)) then tsmaxprice=0 tsminprice=close tsnewsl=0 mypositionpriceatr = 0 endif positioncountatr = abs(countofposition) if tsnewsl > 0 then if positioncountatr > positioncountatr[1] then if longonmarket then tsnewsl = max(tsnewsl,positionprice * tsnewsl / mypositionpriceatr) else tsnewsl = min(tsnewsl,positionprice * tsnewsl / mypositionpriceatr) endif endif endif if tssensitivity=1 then tssensitivitylong=close tssensitivityshort=close elsif tssensitivity=2 then tssensitivitylong=high tssensitivityshort=low elsif tssensitivity=3 then tssensitivitylong=low tssensitivityshort=high elsif tssensitivity=4 then tssensitivitylong=typicalprice tssensitivityshort=typicalprice endif if longonmarket then tsmaxprice=max(tsmaxprice,tssensitivitylong) if tsmaxprice-positionprice>=tgl then if tsmaxprice-positionprice>=tsminstop then tsnewsl=tsmaxprice-tgl else tsnewsl=tsmaxprice-tsminstop endif endif endif if shortonmarket then tsminprice=min(tsminprice,tssensitivityshort) if positionprice-tsminprice>=tgs then if positionprice-tsminprice>=tsminstop then tsnewsl=tsminprice+tgs else tsnewsl=tsminprice+tsminstop endif endif endif if longonmarket then if tsnewsl>0 then sell at tsnewsl stop endif if tsnewsl>0 then if low crosses under tsnewsl then sell at market // when stop is rejected endif endif endif if shortonmarket then if tsnewsl>0 then exitshort at tsnewsl stop endif if tsnewsl>0 then if high crosses over tsnewsl then exitshort at market // when stop is rejected endif endif endif mypositionpriceatr = positionprice endif //=================================== RSIexit = 1 // in profit if RSIexit then myrsi=rsi[r](close) if myrsi<rl and barindex-tradeindex>1 and longonmarket and close>positionprice then sell at market endif if myrsi>rs and barindex-tradeindex>1 and shortonmarket and close<positionprice then exitshort at market endif endif

This topic has 30 replies, 12 voices, and was last updated 3 years ago by nonetheless.

Viewing 31 post (of 31 total)

← 1 2 3

12/05/2021 at 7:36 PM #182853

nonetheless

I’ve been testing 1m and 2m versions. Not nearly good enough.

I have one other idea I want to try, I’ll post it if it works.

4 users thanked author for this post.

Midlanddave, tompa3, murre87, phoentzs

nonetheless
Participant

Topics: 83
Replies: 1237
Been thanked: 978 times
Author

Posts

Viewing 31 post (of 31 total)

← 1 2 3

Find exclusive trading pro-tools on

NAS scalping strategy

4 users thanked author for this post.